October 05, 2026 9 min read

Hey, so if you own a Peak, a Peak Pro or a Proxy, the three Puffco accessories that change your sessions the most are a spare glass attachment, a 3D chamber, and a heated loading tool. Everything else on the list is comfort, color, or travel convenience, and you can wait on all of it.

Quick answer: The Puffco accessories worth buying first are a spare glass attachment, a 3D chamber for your device, and the Heated Loading Tool. Expect roughly $22 to $100 per piece.

Puffco gear is a closed system. Your banger does not fit it, your 14mm glass does not fit it, and the parts that do fit are priced like they know that. So the question is not whether Puffco accessories are expensive. It is which ones earn the money and which ones sit in a drawer.

Here is how I'd rank them, with the live prices from our Puffco collection so you can see what each tier actually costs instead of guessing from a forum post written three years ago.

Product photograph of three separate electronic dab rig accessories arranged...

Of all the Puffco accessories, buy spare glass first

Glass is the part that breaks. It is also the part that changes how the device feels more than any other single swap, because it is where the water and the percolation live. A chamber changes how your concentrate is heated. Glass changes everything that happens afterward.

There is a practical argument too. If your only glass piece cracks on a Tuesday, your device is a paperweight until a replacement arrives. A spare turns a week of downtime into thirty seconds of swapping.

Proxy glass: Bub or Wizard, same price, opposite ideas

For the Proxy, you have two directions and they cost the same:

  • Proxy Bub, $97.52. Hand-blown borosilicate with water filtration. This is the one that makes a Proxy feel like a small rig instead of a stick. The water does the cooling.
  • Proxy Wizard, $97.52. No water at all. A long spiral stem that cools vapor by distance, because vapor loses heat to the glass on the way up. Drier in the mouth, nothing to dump out afterward, and nothing to spill in a bag.

Same cost, genuinely different philosophies. If you want the draw cooled and filtered, the Bub. If you resent carrying water and emptying it, the Wizard. People who travel with a Proxy almost always end up on the Wizard, and people who use it at home almost always end up on the Bub.

Peak and Peak Pro glass: the detachable design is the point

  • Puffco Pro Glass, Clear, $72.45. Hand-blown borosilicate with a percolator. Straightforward, smooth, easy to live with.
  • Puffco Peak Glass 2.0, $79.95. Dual chambers with two sets of laser-cut perc holes, and it detaches for cleaning. Stock on this one is thin right now, so check the page before you plan around it.

The honest tradeoff on glass: more percolation means a smoother draw and more surface for residue to cling to. Every perc hole is a place for buildup. The 2.0's detachable design is the real reason it is worth the extra seven dollars over the Pro Glass, not the extra holes, because a piece you can take apart is a piece you will actually clean.

Cleaning glass without wrecking it

Borosilicate handles heat well and handles sudden temperature changes badly. Let a hot attachment come to room temperature before it meets cold water, or you will learn about thermal shock the expensive way. Warm water and isopropyl, a shake, a rinse, and a full dry before it goes back on the device. If you want the longer version of this, our silicone and glass cleaning guide covers the parts that apply here too.

Chambers are the real upgrade, and the most expensive one

A chamber is the heater. Swapping it is the only accessory change that alters how your concentrate is actually vaporized, which is why it is the one Puffco accessories decision people agonize over for weeks.

Proxy 3D Chamber, Onyx, $50.00. Heats from more surfaces than a bottom-only design, so less of your dab sits cold against an unheated wall while the rest cooks. The practical result is more even vaporization at the same setting and less material left behind.

Chambers are consumable, so budget for that

This is the part nobody tells you before the first one dies. Every chamber has a finite life. Heavy daily use shortens it. Treating a chamber as a one-time purchase is how people end up convinced their expensive device "stopped working" after eighteen months.

Plan on it the way you plan on brake pads. If you use the device daily, set aside the cost of a replacement chamber once a year and the whole ownership experience stops being a series of unpleasant surprises.

A fresh chamber fixes more than you'd expect

A worn chamber produces exactly the symptoms people blame on the device itself: weak vapor, uneven heating, a scorched taste that survives every cleaning you throw at it, and sessions that need a second pull to finish what used to take one.

If your Proxy has gone quiet and you have already cleaned everything twice, the chamber is the suspect. Try that before you shop for a new device.

What a chamber will not fix

A new chamber will not fix a temperature problem. If your hits taste burnt at every setting, that is a temp question, not a hardware one. The Peak Pro's four presets run roughly 490, 510, 530 and 545 degrees Fahrenheit, and the app reaches up to 620, which is more heat than most concentrates want. We went through which material wants which number in the e-rig temperature guide.

A chamber also will not fix a tired battery, and it will not fix a device that has been dropped onto tile.

Tight close-up product photograph of ONE clear glass carb cap resting flat...

Carb caps: Oculus or ball cap

Two options for the Peak Pro, and they are not interchangeable in feel. Both cost less than glass and both change the draw more than their price suggests.

Oculus Carb Cap, $49.95

Clear, press-fit, and you can see into the chamber while it works. The press fit matters as much as the window does, because a cap that creeps loose mid-draw ruins airflow and most people blame the device instead of the cap.

Pick this one if you are still learning what a properly loaded chamber looks like. Watching is how you learn it, and no written guide substitutes for seeing your own material behave.

Black Ball Cap, $59.95

A ball joint instead of a flat puck, so you steer airflow by rolling it rather than lifting and reseating. Ten dollars more than the Oculus and no window.

Pick this if you already know what you are doing and you want finer control over where the air goes. The same directional-versus-static logic applies to glass rigs, which we broke down in our carb cap comparison. If you are shopping for a 14mm rig instead of an electronic one, the full carb caps collection is a different shelf entirely and a much cheaper one.

If your cap will not stay seated

Nine times out of ten it is residue on the seat, not a worn cap. Clean the rim of the chamber and the underside of the cap before you decide the cap is finished. Buildup on a press-fit surface is thin enough to be invisible and thick enough to break the seal.

The Heated Loading Tool, and the $14.99 part that saves it

Puffco Heated Loading Tool V2, $54.99. A ceramic tip that warms up so concentrate slides off it instead of stringing everywhere. The V2 added a more secure cap connection and a reshaped glazed ceramic tip that leaves less behind than the original.

Why people stop mocking it

Fifty-five dollars for a loading tool reads absurd until you have tried to move cold rosin with a cold steel pick in a cold room. Material that will not release from a tool is material you paid for and did not use. It is the accessory people laugh at in the cart and then keep on the table.

That said, it is a convenience purchase. It makes loading cleaner and faster. It does not make anything taste better, and if your budget is tight, glass and chambers come first.

The replacement tip is the actual bargain

The 510 Thread Hot Knife Replacement Tip is $14.99. Ceramic heating element, screw-on install, rated to 500 degrees Fahrenheit.

If you own a 510-threaded hot knife and the tip has stopped heating evenly, that is a fifteen dollar fix instead of a fifty-five dollar replacement. Check the threading on yours before ordering, because not every heated tool uses 510 and the ones that do not will not take this tip.

Plain unheated picks and scoops live in the dab tools collection and cost a small fraction of a heated tool. If you have never owned either, start there.

The dry top is the cheapest way to widen what your device does

3" Clear Puffco Dry Top, $22.49. Clear borosilicate, three inches, fits the Peak and the Peak Pro. It converts the device for dry herb, which means the expensive thing on your table stops being a single-purpose appliance.

Why this is the best value on the list

Twenty-two dollars against a device that otherwise sits idle whenever you are not reaching for concentrates. Nothing else in the accessory lineup changes what the device is for, and nothing else does it for the price of a tray.

It is also the one accessory that makes the device useful to a second person in the house who does not use concentrates at all.

What to expect from it

It is a dry attachment on a device engineered around concentrates, so set expectations accordingly: it works, it is convenient, and it is not going to replace a dedicated dry herb vaporizer for someone who only uses flower. Clear glass is the right call here for one unglamorous reason, which is that you can see when it needs cleaning.

Travel packs: $34.99, and read what is in the box

Both travel packs are $34.99, and they contain different things. This trips people up constantly, because the names are nearly identical.

Pack Fits What is inside
Peak Pro Travel Pack Peak Pro Carry pack plus an Oculus carb cap
Peak Travel Pack, Black Peak, original Silicone carrying case, loading tool, tether

The Peak Pro pack is a carb cap with a free bag

The Peak Pro version includes an Oculus carb cap, which is $49.95 bought on its own. If you wanted that cap anyway, the travel pack is the cheaper route to it and the bag comes along for nothing. That is the single best piece of arithmetic on this page, and it is sitting in plain sight on a product page most people scroll past.

The original Peak pack is a different proposition

A silicone carrying case, a stainless loading tool and a tether. Genuinely useful if you move your Peak around, and there is no fifty dollar part hiding inside it, so judge it on the case alone. The tether is the quiet hero: carb caps are the most-lost accessory in this whole category.

Studio product photograph of ONE slim heated loading tool lying diagonally...

What each price tier gets you

Budget What you get
Under $25 Dry top ($22.49) or a 510 hot knife replacement tip ($14.99)
$35 to $50 Travel pack ($34.99), Oculus carb cap ($49.95), Proxy 3D chamber ($50.00)
$55 to $80 Heated Loading Tool ($54.99), ball cap ($59.95), Pro Glass ($72.45), Peak Glass 2.0 ($79.95)
Around $100 Proxy Bub or Proxy Wizard ($97.52)

A sensible order of operations

If you are starting from zero with a Peak Pro and want the most improvement per dollar, the order is dry top, then the travel pack for the included cap, then a spare glass piece. That is about $137 and it covers breakage, portability, and dry herb in one go.

For a Proxy owner, the order is simpler: pick Bub or Wizard based on whether you want water, then keep a spare 3D chamber in the drawer.

Three things to check before you order

  1. Which device you actually own. Peak, Peak Pro and Proxy parts are not cross-compatible, and the product names are close enough to catch people out. Proxy parts say Proxy. Peak Pro parts say Peak Pro. A part that says only Peak is for the original.
  2. Whether your glass is the old or new generation. Peak Glass 2.0 is not the same fitting as first-generation Peak glass.
  3. Threading on heated tools. The $14.99 replacement tip is 510 thread. Confirm before buying, because a mismatch is not a returnable mistake once installed.

Shop Related Products

Where accessories stop being the answer

If your device is years old, the battery is tired, and you are already into it for a new chamber and new glass, you are spending a meaningful fraction of a current device on repairs.

Do the arithmetic before the second part

A chamber at $50 plus glass at $80 is $130 on a device whose battery is already fading. That is the point to stop, look at the e-rigs collection, and read our electric rig buyer's guide before you commit either way.

Accessories are worth it when the device is fundamentally sound. They are not worth it as life support.

Prices and stock here are from our catalog as of October 2026 and move around, so the live Puffco pages are the source of truth.

Shop the guide

Puffco

Peak, Peak Pro and Proxy accessories in stock now, from a 14.99 replacement tip to Proxy glass around 97.52, shipping from Washington.

Browse Puffco

Free US shipping on smokeshop orders over $50.