Pinch Bucket Banger

The Pinch Bucket Banger is a quartz banger for concentrates with a 25mm bucket and a pinch in the neck. The pinch keeps oil from running down the neck of the banger and collecting in your rig. Pick a 10mm male joint at 45° or 90°, or a 14mm male joint at 45°, to match your rig.

Key Benefits

• Keeps oil out of your rig - The pinch in the neck stops oil from running down the banger and collecting in your rig.
• 25mm quartz bucket - A quartz bucket made for dabbing concentrates.
• Pick your joint - Comes in 10mm male at 45° or 90°, or 14mm male at 45°, so you can match the female joint on your rig.

Best For

This banger is made for dabbers who are tired of oil running down the neck of their banger and pooling in the rig. The pinch keeps your concentrate in the 25mm bucket. If you’re building out your dab station with more smoke shop gear, this is an easy add to your lineup.

How to use it

Slide the male joint of the Pinch Bucket Banger into the matching female joint on your rig. Heat the bucket with a torch, let it cool to your preferred temperature, then drop in your concentrate. The pinch in the neck keeps oil from running down into your rig.

When you’re done and the banger has cooled, wipe any leftover oil from the inside with a cotton swab. For a deeper reset, you can soak it in isopropyl alcohol, rinse with warm water, and let it dry fully before your next sesh. Setting it on a nonstick dab mat between uses helps keep your table from collecting resin rings.

Specs

Fit & Compatibility

The Pinch Bucket Banger is made for rigs with a 10mm or 14mm female joint. Pick the size and angle that match your rig: 10mm male at 45° or 90°, or 14mm male at 45°. If you’re building out your dab station, it pairs nicely with stash-ready storage and packaging for your concentrates.

Why this style works

The pinch is what sets this banger apart. It keeps oil from going down the neck of the banger and collecting in your rig, so more of your concentrate stays in the bucket and your rig stays cleaner.

Because it’s quartz, there’s no metal or silicone touching your concentrate. It works on glass rigs and on tougher silicone rigs you don’t have to baby.

FAQ

• Will this fit my rig?

  If your rig has a 10mm or 14mm female joint, yes - just pick the matching joint size and angle. If you’re not sure, most 14mm joints are about the width of a sharpie marker at the opening. For an 18mm joint, you’d need an adapter.

• Can I use this for concentrates?

  Yes. This is a quartz banger made for concentrates. Pair it with the right carb cap for better temp control and airflow.

• How should I store it when I’m not using it?

  Let it cool completely, then park it in a safe spot on your tray or in a padded drawer so it’s not rolling around with lighters and tools. If you like keeping everything organized by strain, pairing this with labeled glass jars or containers makes your setup a lot easier to manage.