Est. 2007
$ 60.99
Free Quartz Banger Included
Every rig ships with a free quartz banger so you are ready to use it right out of the box.
The 9 inch Clear Ice Pinch Fab Rig is a clear borosilicate dab rig with a fab-style body, a ring of pinched glass near the top, a showerhead perc in the base and a side-mounted vertical joint. It ships with a 14mm male 90° quartz banger.
Most 9 inch rigs are either plain tubes or crammed with percs you can never clean. This one sits in the middle, and that's why we wanted it on the shelf.
The body is a clear cylinder with a band of pinched glass pressed in near the top, the kind of indents you'd usually see on a bong neck. Below it the cylinder flares out into a wide base, and in the middle of the floor sits a small showerhead perc. A tube runs down the outside of the body to feed it, ending at a vertical joint on the side. On top, a bent neck curves toward you and ends in a flat, wide lip.
Showerhead diffusion. The showerhead at the bottom has slits around its edge, so vapor leaves in a ring of small bubbles. It's a smoother pull than an open stem, and easy to see working through clear glass.
Ice pinches as a design feature. The pinched band adds texture and catches light, and it breaks up the plain cylinder (it also gives your fingers a natural spot to hold).
Joint off to the side. The banger rides on its own tube beside the body, so heat stays away from the chamber and your hand.
Height for a cooler pull. Nine inches gives vapor more distance to travel than a mini rig, without turning it into a bong-sized piece.
| Spec | Detail |
|---|---|
| Material | Borosilicate glass |
| Length | 9 inches |
| Style | Fab-style rig, ice pinch band |
| Percolator | Showerhead |
| Joint | 14mm female, vertical, side tube |
| Included Banger | 14mm male, 90°, quartz |
| Colors | Clear |
| Best for | Legal concentrates, smooth bigger dabs, daily home use |
This 9 inch clear borosilicate dab rig has a fab-style cylinder body with a band of ice pinches, a flared base and a showerhead perc. Its vertical 14mm female joint sits on a side tube and takes the included 14mm male 90° quartz banger. The bent neck ends in a flat lip, and it's made for legal concentrates.
Fill through the mouthpiece until the showerhead's slits sit just below the water line. You'll see the level clearly through the clear body. Seat the 90° banger, heat it, let it cool briefly, then dab and cap.
Draw at a slow, even pace so the showerhead can do its job (a count of three to five works well).
Pro Tip: Test the water level with a dry pull before you heat anything. You want a soft, even rumble from the showerhead. If you hear gurgling at the neck, pour a little out (a tiny bit makes a big difference).
Our dab rig water level guide shows where the line should sit for a smooth pull.
Rig upgraders: You've had a mini rig and want something taller with real diffusion.
Clear glass purists: You like to watch the bubbles and know when it's time to clean.
Bigger-dab folks: You take fuller dabs and appreciate a little extra height to cool them down.
Worth Noting: At 9 inches with a bent neck, this rig is taller than most dab setups. It needs a secure spot on the shelf away from busy edges.
Swap the water before each session to keep the showerhead clean. For a deep clean, pour 91% isopropyl alcohol and coarse salt into the body, plug the openings, and shake so the salt washes over the showerhead and the side tube. Rinse with warm water and air dry.
Warning: Wait until the rig and banger are completely cool before cleaning. Never run hot glass under cold water, it can crack. The dishwasher is off limits.
Finish the kit with a cap from our carb caps, a spare from our quartz bangers, a few picks from our dab tools, or more clear glass from our rigs. Questions? Reach us through our contact page.
Discreet shipping in plain packaging. 30-day returns on unused items. Card payments processed securely; we never store your card details.