Est. 2007
$ 60.99
Free Quartz Banger Included
Every rig ships with a free quartz banger so you are ready to use it right out of the box.
The 8" Peak Color Recycler is an 8 inch two-tone glass recycler top made to fit the Puffco Peak and Peak Pro. Water cycles between its two chambers through a pair of colored side arms.
Your Peak or Peak Pro does the heating, but the glass on top decides how each pull feels. This one turns the device into a small recycler: an hourglass of two stacked cones, a long colored arm carrying vapor up one side, and a curved return arm on the other that keeps the water cycling while you draw.
We brought it in for people who mostly dab at home and want their device to look like a full rig on the table. It's third-party glass, made to fit the Peak family.
Recycling on a portable. The side arms keep the water moving between the cones as you pull, so the vapor gets extra contact with it on the way up, with no torch setup involved.
A neck that leans in. The mouthpiece bends toward you, so you can sip without leaning over the base.
Color that frames the shape. The body is one tint and everything that sticks out (lip, arms and base piece) is the second color, which makes the hourglass outline easy to read.
Lavender & Green pairs a lavender body with a green lip, green arms and a green base piece. Blue & White sets a deep blue body against milky white accents. Lavender & White keeps the lavender body and switches every accent to milky white. Each top is worked by hand, so the tint and the color joins vary a little from top to top.
| Spec | Detail |
|---|---|
| Material | Two-tone color glass |
| Height | 8 inches |
| Style | Recycler top, hourglass body |
| Fits | Puffco Peak and Peak Pro (no banger joint) |
| Colors | Lavender & Green, Blue & White, Lavender & White |
| Best for | Legal concentrates on a Peak at home |
The 8" Peak Color Recycler is an 8 inch two-tone glass recycler top made to fit the Puffco Peak and Peak Pro. It has an hourglass body, a bent neck, two side arms and a colored base piece that seats on the device, and it comes in Lavender & Green, Blue & White or Lavender & White.
With the device cool, lift off the glass it's wearing. Fill this top off the device, pouring water down the mouthpiece until the bottom of the inner tube in the lower cone sits just under the surface. Then seat it on the base, load it, run a heat cycle and keep the draw slow so the water has time to cycle.
Pro Tip: Start with less water than you think and test with a cold pull before heating. Adding a splash is easy, but pouring extra out means taking the top off again (and water near the base is what we'd most like you to avoid).
Every chamber shape has its own sweet spot, and our dab rig water level guide explains where the water line should sit.
Couch dabbers: If your Peak rarely leaves the coffee table, this gives it a recycler's draw.
Second-top owners: Keep a short top for travel and this one for nights in.
Color people: Three two-tone pairs, none of them shy.
Worth Noting: At 8 inches with water inside, this is a tall load for a portable base, so we'd treat it as a home top and keep the device on a flat, steady surface.
Dump the water after each session. For a deeper clean, take the top off, add 91% isopropyl alcohol and coarse salt, cover the openings and shake so the mix runs through both arms. Rinse with warm water and let it dry completely.
Warning: Clean only cool glass, since warm glass meeting cold water can crack, and keep it out of the dishwasher. Keep alcohol and water away from the device, and make sure the base piece is dry before you reconnect.
Keep a dab tool beside the device for loading, store concentrate in our concentrate jars, and use our cleaning supplies on those arms. Need parts for the device itself? Our Puffco collection is the place to start.
Discreet shipping in plain packaging. 30-day returns on unused items. Card payments processed securely; we never store your card details.