5" Monark Cheese Wheel Ash Catcher

Ships From WA Same day by 2 PM PT on weekdays
30-Day Returns No-hassle, real humans
Secure Checkout Card, Google Pay or Sezzle
Free U.S. shipping on orders over $50 (add $15.01 more to qualify)
Ships the same day on weekday orders placed by 2 PM Pacific
Thousands of orders shipped from Washington since 2014

5" Monark Cheese Wheel Ash Catcher: cleaner water, fewer deep cleans

Monark Cheese Wheel at a glance

The 5" Monark Cheese Wheel Ash Catcher is a clear glass pre-chamber with a colored cheese wheel perc and a sandblasted Monark logo. It fits a 14mm female joint: pick 14mm Male 90° for a joint that points straight up, or 14mm Male 45° for one angled at 45°.

  • Material: Clear borosilicate glass with a color perc
  • Length: 5 inches
  • Style: Ash catcher with a cheese wheel perc
  • Look: Clear rectangular chamber, colored wheel at the bottom, sandblasted Monark logo
  • Joint: 14mm Male 90° or 14mm Male 45°, plus a frosted female joint on top for your bowl
  • Perc: Cheese wheel at the base of a fixed center tube
  • What's Included: One ash catcher in the joint angle you pick (bowl not included)
  • Shipping: Ships the same day on weekday orders placed by 2 PM Pacific
  • Returns: 30-day returns on unused items in original packaging

Ash and loose bits ride the smoke down into your bong water, and the water goes brown fast. This 5 inch Monark catcher stops them one step early, in a small chamber that's quick to dump and rinse.

It's a Monark piece, and we like how cleanly it's built. Your bowl goes in the frosted joint on top. Smoke drops down a center tube into a thick colored puck at the bottom, the cheese wheel, which has holes cut around its edge. From there it bubbles through a little water and leaves through the side arm into your bong, while ash and bits stay behind in the catcher.

Why we like the cheese wheel perc

A simple perc that's easy to clean. The wheel is a solid puck with side holes. It spreads the smoke out without the tiny slits that clog on fussier percs.

Extra filtration. Smoke passes through water twice (once here, once in your bong), so each pull comes out smoother.

Clear glass, clear view. The body is clear apart from the logo and the wheel, so you can see when the water needs changing.

The sandblasted logo. Monark's logo is frosted right into the side of the chamber, so it won't wash off.

Joint angle options

14mm Male 90° has the arm leaving the chamber and turning straight down. Pick it if your bong's 14mm joint points straight up.

14mm Male 45° is angled for a 14mm joint that comes off the bong at 45°, which is how most beakers with a removable downstem are built.

The perc wheel's color varies from piece to piece, with blue, green and purple all possible, and it isn't a choice at checkout. Each catcher is also shaped by hand, so small details such as the curve of the arm differ slightly from one to the next. Not sure which angle your bong has? Ask us on our contact page before you order.

Specifications

Spec Detail
Material Borosilicate glass
Length 5 inches
Style Ash catcher, cheese wheel perc
Joint 14mm Male 90° or 14mm Male 45°
Colors Clear body, color perc wheel (varies)
Best for Dry herb, keeping 14mm bong water cleaner

The 5" Monark Cheese Wheel Ash Catcher is a 5 inch clear borosilicate glass ash catcher with a color cheese wheel perc and a sandblasted logo. It comes as 14mm Male 90° or 14mm Male 45° to match your bong's joint angle, and it's made for dry herb.

How to use it

Add water through the top joint until the holes in the wheel are just covered. Seat the catcher in your bong's joint, then put your bowl in the catcher's top joint. Light and pull as normal. The catcher fills with smoke first, so the pull takes a touch longer.

Pro Tip: Use less water than you think. A shallow fill that just covers the wheel holes gives good bubbles without splashing into your bong (too much water makes the draw heavy).

Wondering whether your setup needs one? Our ash catcher guide covers when a catcher is worth adding and which size suits your bong.

Who it's for

The clean-water crowd: You hate dirty bong water and want fewer deep cleans of your bong.

The smooth-hit seeker: A second round of water makes each pull gentler.

The setup builder: You're adding pieces to a 14mm bong and want a name you recognize, like the Monark glass we carry.

Worth Noting: An ash catcher adds height and weight on your bong's joint. On a small or light bong it can make the setup top heavy, so a sturdy base helps.

Care and cleaning

Dump the water after each session and give the chamber a quick rinse. For a full clean, fill it with 91% isopropyl alcohol and coarse salt, cover both joints with your fingers or plugs and shake. The holes in the wheel clear out fast. Rinse with warm water.

Warning: Let it cool before cleaning, because hot glass can crack under cold water. Keep it out of the dishwasher, and hold it by the body, not the arm, when you take it off.

Questions about the Monark Cheese Wheel

Should I get the 90° or the 45° joint?
Match the angle of your bong's joint. If your joint points straight up, pick 14mm Male 90°. If it comes off the bong at 45°, as on most beakers with a removable downstem, pick 14mm Male 45°. The wrong angle makes the catcher lean and puts strain on both joints.
What is a cheese wheel perc?
A cheese wheel perc is a thick round puck with holes cut around its edge. Smoke comes down the center tube, exits through those holes and bubbles up through the water. It diffuses well and has no tiny slits, so it's one of the easiest percs to clean.
Can I pick the color of the wheel?
No, the only choice at checkout is the joint angle. The perc wheel's color varies from piece to piece, and blue, green and purple are all possible. The body is clear on every piece, with the Monark logo sandblasted onto the side of the chamber.
How much water goes in the ash catcher?
Just enough to cover the holes on the wheel. Pour it in through the top joint and check from the side. A shallow fill gives good bubbles and keeps water from splashing through the arm into your bong. Too much water makes the pull feel heavy.
Will it fit my 14mm bong?
It has a 14mm male joint, so it fits bongs with a 14mm female joint at the matching angle. Your bowl goes into the frosted joint on top of the catcher. If your bong has an 18mm joint, an adapter can work, but we'd point you to a catcher made for 18mm.
Is the Monark logo a sticker?
No, it's sandblasted into the glass, so it's part of the surface. It won't peel or wash off with alcohol cleaning. It shows as a frosted script on the clear chamber and is easiest to see against a dark background or with light behind it.
How often should I change the water in it?
Change it after every session. The catcher holds only a small amount of water, and it's the first water the smoke hits, so it dirties quickly. A fresh fill each time keeps the taste clean and stops ash from building up around the holes in the wheel.

Complete your setup

See our other Monark pieces, compare more ash catchers, find a bong to pair it with in bongs and water pipes, and grab a bowl from our flower bowls.