4" Color Showerhead Ash Catcher

Ships From WA Same day by 2 PM PT on weekdays
30-Day Returns No-hassle, real humans
Secure Checkout Card, Google Pay or Sezzle
Free U.S. shipping on orders over $50 (add $27.01 more to qualify)
Ships the same day on weekday orders placed by 2 PM Pacific
Thousands of orders shipped from Washington since 2014

4" Color Showerhead Ash Catcher: Cleaner water, fewer deep cleans

Showerhead Ash Catcher at a glance

The 4" Color Showerhead Ash Catcher is a clear glass pre-cooler with a colored showerhead stem inside and a 14mm male joint, made at 90 degrees or 45 degrees to match your bong. It catches ash and resin before they reach your bong.

  • Material: Clear borosilicate glass with a colored stem and showerhead
  • Height: 4 inches
  • Style: Wet ash catcher with showerhead diffuser
  • Joint: 14mm male, 90 degree or 45 degree (pick the one that matches your bong)
  • Look: Clear cylinder body, frosted top joint, color stem down the center
  • Colors: 90 degree in Green, Smoke, Pink or Teal; 45 degree in Green, Blue, Pink or Teal
  • What's Included: One ash catcher in the color you pick (bowl not included)
  • Shipping: Ships the same day on weekday orders placed by 2 PM Pacific
  • Returns: 30-day returns on unused items in original packaging

Changing bong water twice a day gets old. So does soaking a whole beaker because the downstem turned brown. An ash catcher is the cheap fix, and a showerhead catcher like this one is the easy place to start.

It's a short, clear cylinder that sits between your bowl and your bong. Smoke goes in through the frosted female joint on top, travels down a colored center tube, and bubbles out through a showerhead at the bottom. A side arm carries it out through a 14mm male joint, set at 90 or 45 degrees depending on the version you pick, down into your bong.

Why this ash catcher earns a spot

It keeps your main water clean. Ash, bits of flower and a lot of the resin get stuck in the catcher. You dump and rinse a small chamber instead of the whole bong.

Showerhead diffusion. The bottom of the stem flares into a slitted showerhead. It splits the smoke into smaller bubbles before it ever hits your bong's water, so you get an extra round of filtration.

Color where you'll see it. Only the stem and showerhead are colored. The body stays clear, so you can see your water level and know when it's time to change it.

Compact. At 4 inches it adds height without making your setup feel like a tower.

Which angle fits your bong?

The angle has to match your joint. The 90 degree version is for pieces whose female joint points straight up, which is common on rigs, recyclers and some straight tubes. On those, it stands upright beside the main tube.

The 45 degree version is for joints that come out of the base at a slant (most beakers with a downstem). A catcher on the wrong angle sits tilted and the water can spill back into your bowl, so check your joint before you pick.

Colors and options

Green is a bright, grassy stem and showerhead that's easy to spot.

Smoke is a gray tint, the low-key choice for clear or dark setups.

Pink is a light blush stem that pairs with pink glass.

Teal is a deep blue-green with the strongest color of the bunch.

Blue is a clear, medium blue stem and showerhead.

Pick the joint as 14mm Male 90° or 14mm Male 45°. Green, Pink and Teal come in both angles, Smoke is 90 degree only, and Blue is 45 degree only.

Each one is made by hand, so the color depth and showerhead shape vary a little from piece to piece.

Specifications

Spec Detail
Material Borosilicate glass
Height 4 inches
Style Wet ash catcher, showerhead stem
Joint 14mm male, 90 degree or 45 degree; frosted female joint on top for your bowl
Colors 90 degree: Green, Smoke, Pink, Teal. 45 degree: Green, Blue, Pink, Teal
Best for Flower on bongs and rigs with a 14mm female joint, upright (90 degree) or angled (45 degree)

This is a 4 inch borosilicate wet ash catcher with a colored center stem that ends in a showerhead. It connects with a 14mm male joint at 90 or 45 degrees, takes your bowl in the frosted joint on top, and comes in Green, Smoke, Pink or Teal at 90 degrees, or Green, Blue, Pink or Teal at 45 degrees.

How to use it

Pull the bowl from your bong, seat the catcher's male joint in the bong's joint, then put your bowl in the top of the catcher. Add water through the top until the showerhead slits are just covered.

Pro Tip: Less water than you think. Fill just past the slits. Too much and water gets pulled up into the bowl when you hit it hard.

Our ash catcher guide explains when you need one and which size to get.

Who it's for

Daily smokers: You use your bong every day and you're tired of how fast the water turns.

Owners of nice glass: You want to protect a heady piece or a perc that's hard to clean.

Rig owners who smoke flower too: If your rig has an upright 14mm joint, the 90 degree version lets you run a flower bowl without dirtying the rig's water path.

Worth Noting: Adding a catcher adds height and a bit of weight up top, so a small or narrow-based bong can feel less stable (keep it on a flat surface).

Care and cleaning

Dump the water after every session or two and rinse with warm water. Once a week, drop it in a bag with 91% isopropyl and coarse salt, shake it so the salt hits the showerhead slits, then rinse.

Warning: Let the glass cool before cleaning. Never run hot glass under cold water, and keep it out of the dishwasher.

Questions about the Showerhead Ash Catcher

Which angle should I pick, 90 or 45 degree?
The 90 degree version fits an upright 14mm female joint, and the 45 degree version fits an angled one. Check which way your bong's joint points before you pick. On the wrong angle the catcher sits crooked and water can run toward the bowl.
What size bowl goes in the top?
The frosted joint on top takes a male flower bowl, usually the one already on your bong. Pull it out, seat the catcher, then put the bowl back in on top. If your bowl doesn't sit snug there, ask us through the contact page before forcing it.
How much water do I put in it?
Add just enough to cover the showerhead slits at the bottom of the stem. That's a small amount in a 4 inch chamber. More water gives no real benefit and raises the chance of splashback into the bowl when you pull hard. Adjust a little until it feels right.
Does an ash catcher make hits harder to pull?
It adds a little drag because the smoke goes through two water chambers instead of one. With the water set just over the showerhead slits, most people barely notice it. If it feels heavy, pour some out. Too much water is usually the cause of a tough pull.
Which part changes with the color?
Only the center stem and showerhead are colored. The body, top joint and side arm are clear or frosted on every version. The 90 degree comes in Green, Smoke, Pink or Teal and the 45 degree in Green, Blue, Pink or Teal, and the clear body always shows the water level.
Can I use this on a dab rig?
You can attach the 90 degree version to a rig with an upright 14mm female joint, but it's meant for flower. Ash catchers stop ash from dry herb. For concentrates, a reclaim catcher works better, and we carry those separately in our reclaim catchers section.
How often should I clean it?
Change the water every session or two and do a full alcohol and salt clean weekly if you smoke daily. The showerhead slits are where resin builds first. Keeping them clear keeps the bubbles small and stops the draw from getting tight over the week.

Complete your setup

See more ash catchers in other sizes and styles, grab a fresh 14mm bowl from our flower bowls, find a bong it fits in bongs and water pipes, or stock up on cleaning supplies for weekly soaks.