Est. 2007
$ 24.99
The Color Plosion Carb Cap is a 2 inch glass bubble cap with worked color sealed inside a clear globe, made to cap a quartz banger during low temp dabs of legal concentrates.
The carb cap is the part of a dab setup you handle every session and notice least, so it might as well be something you like looking at.
This one is a clear glass bubble stuffed with a dense cluster of color, like tiny pebbles sealed behind glass. A short tube runs out one side, and a flared lip on the other end gives you a handle. We carry it in five builds, from single colors with white linework to two-tone caps.
Color sealed inside. The color sits inside the bubble, so the outside stays smooth, clear glass that cleaning can't wear down.
Linework or tint on the ends. The Red, Orange and Red & White caps carry fine white linework on a clear tube and handle. Yellow & Green and Teal & Pink use a tinted tube and handle instead.
Classic bubble shape. A round bubble covers the top of a banger and lets you tilt it to steer the airflow across the floor (the same trick a directional cap uses).
Easy to grab. The flared handle gives your fingers a lip to pinch, a step away from the hot quartz.
Red is a full cluster of bright cherry red with white linework on the ends.
Orange is the same build in a warm tangerine.
Yellow & Green packs lemon yellow behind the glass, with a green tube and handle.
Red & White alternates red and white bands of color for a candy-stripe look.
Teal & Pink fills the bubble with teal and finishes the tube and handle in light pink.
Every cap is hand-worked, so the color cluster, banding and linework differ a little from one cap to the next (no two look quite the same up close).
| Spec | Detail |
|---|---|
| Material | Glass with worked color and linework |
| Length | 2 inches |
| Style | Bubble carb cap |
| Fit | Bucket-style quartz banger with a wide enough opening |
| Airflow | Open tube on one side, flared handle on the other |
| Colors | Red, Orange, Yellow & Green, Red & White, Teal & Pink |
| Best for | Low temp dabs |
The 2" Glass Color Plosion Carb Cap is a 2 inch glass bubble cap with worked color inside a clear bubble, white linework or a tinted tube, and a flared handle. It sits on a bucket-style quartz banger with a wide enough opening, and it comes in Red, Orange, Yellow & Green, Red & White or Teal & Pink.
Heat your banger, let it cool to your usual dab temperature, and drop in your concentrate. Set the cap on with the tube end down and tilt it gently as you inhale, so the airflow moves the melting concentrate around the floor.
Pro Tip: Give the cap a slow half turn while you pull. Rotating the tube points the air at different parts of the banger floor, so less concentrate is left behind to clean out later.
Our carb cap guide explains airflow, timing and technique in more depth, which helps if you're new to capping.
Low temp dabbers: A carb cap traps heat in the banger, which is what makes cooler dabs work.
Collectors who match glass: Five builds make it easy to pair with a rig, a dab tool or a set of terp pearls.
Gift shoppers: It's small, bright and easy to like, even for someone who already owns a cap.
Worth Noting: A bubble cap needs a banger with a bucket wide enough to seat it. Before ordering, check your banger's opening against a cap you already own, or ask us on our contact page.
Soak the cap in isopropyl alcohol for about ten minutes, rinse it with warm water and run a cotton swab through the tube. Store it on a silicone pad or in a padded case, since a round cap will roll.
Warning: Let the cap cool fully before cleaning it. Hot glass that meets cold water can crack, and the thin tube is the most likely spot. Don't put it in the dishwasher.
Seat it on a banger from our quartz bangers, load up with a tool from our dab tools, give it a soft landing on our silicone pads, or browse the rest of our carb caps.
Discreet shipping in plain packaging. 30-day returns on unused items. Card payments processed securely; we never store your card details.