$ 12.15
The fitment comes first on this one. It is cut for an 18mm joint, the larger of the two joint sizes you will meet on a water pipe, so it will not seat in a smaller joint no matter how gently you push.
An American-made glass flower bowl with an 18mm joint, 2.5" long, in a color illusion finish. Three colors were offered and all three are currently sold out.
Joint size is the single most common ordering mistake we see on bowls. The joint is the tapered ground glass connection where the bowl meets the piece, and it comes in a small standard and a large standard. This bowl is the large one at 18mm. If the bowl currently in your water pipe looks chunky and wide at the base, that is the size you are running.
The quickest test costs nothing: pull your current bowl and set it next to a dime. A dime is roughly the width of the smaller joint standard. Anything visibly wider than that coin at the ground section is the 18mm class, and this bowl belongs in it.
Beyond fitment, the appeal is the finish. A color illusion treatment shifts what you see as the light and the angle change, so the bowl reads differently across a room than it does in your hand. It is made in the USA, which is the kind of thing that tends to matter to people who have handled a lot of imported glass.
Correct for larger joints. Plenty of bowls are made in the smaller size and comparatively few in 18mm, so anyone running a big joint knows the search is harder.
Domestic production. Made in USA is listed on this item, which is not something we can say about most bowls on the wall.
Finish that moves. The color illusion effect changes with the angle instead of sitting flat.
Three shades. Blue, Green and Yellow, all on the same 2.5" body.
One-piece glass. No hardware, no gasket, nothing to replace over time.
| Attribute | Detail |
|---|---|
| Family | Flower bowl |
| Joint size | 18mm |
| Material | Glass |
| Length | 2.5" |
| Origin | Made in USA |
| Color options | Blue, Green, Yellow |
| Use | Flower smoking |
| Shipping weight | 6.0 ounces |
| Stock | None available |
This is an American-made glass flower bowl for dry flower, 2.5" long, built for an 18mm joint, sold in Blue, Green and Yellow, shipping at 6.0 ounces, and currently at zero units across all three colors. Joint gender and joint angle are not recorded in our data for this piece, so compare it to your existing bowl before ordering when it returns.
Take your existing bowl out and look at the ground glass section. Wider is 18mm, narrower is the small standard. If you have an adapter in the piece, remember that the adapter changes the size your bowl needs to be, not the size printed on the water pipe.
Seat the bowl with a light twist and no force. Ground glass grips ground glass, and a bowl driven in hard while warm can stick when it cools.
Pro Tip: Take a photo of your joint next to a coin before you shop. It settles the size question in two seconds and it saves a return.
Owners of larger water pipes. If your piece runs an 18mm joint, your options are thinner than everyone else's and this is one of them.
Buyers who care about origin. Made in USA is on the label here.
People who like a finish with movement. The color illusion look does something a plain colored bowl does not.
This bowl fits an 18mm joint, the larger of the two common standards. Pull the bowl you own and compare its ground section to a dime; visibly wider than the coin means you are in this size class. If yours looks about the width of that coin, you need the smaller bowl instead.
Not directly, but an adapter can bridge the gap. This is cut at 18mm, and forcing a mismatched joint chips both parts. If you want to run it in a piece with a smaller joint, buy the correct reducer and check that it seats cleanly before you load anything into the bowl.
It is a finish that shifts appearance as light and viewing angle change, rather than showing one flat color. This bowl was offered in Blue, Green and Yellow with that treatment. The effect is in the glass work itself, so cleaning and normal handling do not wear it away.
Made in USA appears in this product's own listing, so that is what we pass along. It is one of the few bowls on our shelf carrying that designation. We do not have factory or workshop details beyond what the product data states, so we leave the rest of the story alone.
All three colors show zero inventory today, so there is nothing to ship. We keep the listing up so buyers hunting an 18mm bowl can see what the style looks like and ask about a restock. Message us and we will tell you what we are hearing about availability.
Shipping weight is listed at 6.0 ounces with packaging, so the bowl by itself weighs less. At 2.5" long it is a normal handheld size and adds no meaningful weight to the piece it sits in. That figure is what we can verify, so it is what we publish.
No extras are listed with this bowl, so it arrives as the bowl alone. There is no screen, no adapter and no case in the box. If your setup needs a screen or a reducer to run an 18mm bowl, add those separately and check sizing at the same time.
Clean it before residue turns into a job. A short soak in isopropyl alcohol with coarse salt, a shake, and a warm rinse will clear a week of use. Dry it fully before the next pack so nothing tastes like alcohol.
Wipe the outside with a soft cloth so the finish stays sharp. If the airway clogs, a pipe cleaner run through gently is the safe tool.
Warning: Never seat a bowl in a joint by twisting hard, and never try to free a stuck bowl with heat. Warm one part while the other is cool and you set up the thermal stress that snaps ground glass at the joint.
Discreet shipping in plain packaging. 30-day returns on unused items. Card payments processed securely; we never store your card details.