$ 74.99
Read the word assorted before you order. This beaker is listed as an assortment, which means the half color finish and etched design you receive are pulled from the batch on our shelf rather than chosen at checkout. Some people love that. If you need one exact colorway, this is not the piece for you, and we would rather say so up front.
A 14" borosilicate beaker with a half color body and an etched design, sold as an assortment with a 14mm joint. There is one listing configuration and it is in stock.
Etching is different from a printed graphic. The surface is worked so the design sits in the glass as a frosted texture instead of a layer sitting on top of it. You can feel it under your thumb. It also means the pattern does not scratch off, because there is nothing to scratch off.
Half color is exactly what it sounds like: colored glass over part of the body, clear over the rest. The practical upside is that you keep a clear window to watch your water level while still getting color. We like that combination on a working piece more than a fully opaque body, which hides how dirty it has gotten.
Underneath the finish it is a standard beaker with a 14mm joint. That is the boring part, and boring is good here. Standard sizing means you can walk into any shop, including ours, and find a bowl that fits.
Etched, not printed. The design is in the surface of the glass, so normal cleaning will not fade it.
Half color body. Color where you want the look, clear where you want to see the water.
Assorted stock. You are buying the style, not a specific piece. Ask us what is on the shelf if you have a preference and we will tell you honestly.
14mm joint. The size that keeps accessory shopping simple for years.
Borosilicate glass. Handles the hot water side of cleaning better than soft glass does.
| Spec | Detail |
|---|---|
| Product | Beaker water pipe |
| Height | 14" |
| Material | Borosilicate glass |
| Joint size | 14mm |
| Decoration | Etched design, half color |
| Selection | Assorted from stock |
| Style | Heady |
| Use | Dry flower |
| Stock | In stock |
Spelled out, you are ordering a 14" borosilicate beaker for dry flower with a 14mm joint, decorated with a half color finish and an etched design, and supplied as an assortment rather than a chosen colorway. Our free bowl promotion applies. We have no published figure for how much water the chamber holds or how thick the walls are, so we leave those lines off the table instead of filling them with numbers we cannot back.
Fill it so the downstem slits are just covered. Etched glass hides fingerprints better than polished glass, but it does not hide a water line, so keep the clear half facing you and you will always know where you stand.
The frosted texture is grippier than plain glass, which is genuinely useful when your hands are cold or you are passing it around. Still hold it by the neck.
If you use a screen in your bowl, this piece is a good candidate. Assorted beakers tend to become the everyday piece rather than the display piece, and screens keep the chamber cleaner for longer.
Pro Tip: Etched surfaces show water spots more than gloss does. Dry the outside with a lint free cloth after cleaning rather than leaving it to air dry, and the frosted areas stay even instead of going patchy.
Bargain hunters with taste. An assortment is how you get surface work at a working piece price.
The not fussy. If a surprise colorway sounds fun rather than annoying, you are the target here.
Anyone tired of fading prints. Etching does not peel.
Owners of 14mm accessories. Everything you have already will seat properly.
No, this listing is sold as an assortment, so the half color finish and etched design come from current stock. If you have a strong preference, message us before ordering and we will tell you what is physically on the shelf that day rather than guessing.
Etching works the surface of the glass so the design becomes a frosted texture in the glass itself. Unlike a printed decal, there is no layer to peel or scratch away. It also gives the body a slightly rougher grip, which helps when you are passing it.
Part of the body is colored glass and the rest is left clear. The practical benefit is a visible window: you can see your water level and how much resin has built up without lifting the piece to the light, which fully colored bodies make difficult.
It has a 14mm joint. That is the most common bowl fitment we sell, so finding spares, screened bowls, or an ash catcher later takes no detective work. Just confirm whether the accessory is listed as male or female before you order.
The beaker stands 14" tall. That size gives smoke a decent run up the neck to cool without turning the pipe into furniture. It fits under most cabinet shelves standing up, which is where we would tell you to store it.
The glass is borosilicate, the same material used across our better pipes. Etching changes the surface, not the strength of the body. Handle it the way you would handle any glass pipe, and keep it away from sudden temperature changes.
Our free bowl promotion applies to this listing, so a bowl ships with the beaker. Because the joint is 14mm, we suggest picking up one spare bowl in that size at the same time. A cracked bowl on a Friday night is a solvable problem if you planned ahead.
Empty the water after each session. Etched glass will not stain, but standing water in any pipe turns sour fast and the smell gets into the room.
For the deep clean, use coarse salt and isopropyl alcohol, plug the openings, and rock the piece rather than shaking it hard. Rinse with warm water until nothing smells of solvent. Then dry the exterior by hand so the frosted areas do not spot.
Warning: Thermal shock is the main way glass pipes die without being dropped. Do not pour boiling water into a cold beaker, do not chase hot water with cold, and never chill glass in a freezer to loosen resin. Change temperature slowly and this piece will last.
Discreet shipping in plain packaging. 30-day returns on unused items. Card payments processed securely; we never store your card details.