Est. 2007
$ 9.49
The 1" Silicone Downstem is a white silicone downstem with a flared top lip, a raised ring under it and two slits near the bottom. It's a flexible replacement for a glass downstem.
Glass downstems break in the sink, snap when a bong tips over, and crack when somebody yanks them out of a tight joint. If you've replaced more than one, you know why this exists.
This one is soft-touch white silicone. It has a rolled lip at the top that rests on the joint, a raised ring just below it, a body that steps down slightly toward the bottom, and two slits cut near the tip so the smoke breaks into bubbles as it hits the water.
It bends instead of breaking. Silicone flexes when it gets knocked (within reason). A tip-over or a slip in the sink that would end a glass stem is usually just a rinse with this one.
Two diffuser slits. The slits near the tip split each pull into smaller bubbles than a single open tube would. It's a simple setup (no tree arms to snap), and it's easy to clean.
Flared lip and ring. The rolled top lip sits on your bong's joint, and the raised ring below it adds grip so you can pull it out without pinching glass.
| Spec | Detail |
|---|---|
| Material | Silicone |
| Length | Listed at 1 inch |
| Style | Slitted downstem |
| Bowl | Not included; takes a separate bowl |
| Color | White |
| Best for | Silicone bongs or glass pieces where a stem keeps breaking |
The 1" Silicone Downstem is a white silicone downstem listed at 1 inch. It has a rolled top lip, a raised grip ring and two diffuser slits near the tip. The bowl isn't included, and it's best for silicone bongs or any piece where a glass stem keeps getting broken.
Slide the downstem into your bong's joint until the top lip rests on it. Fill the bong so the slits at the tip sit under the water line. Drop your bowl into the top of the downstem, pack it with your dry herb or legal smoking blend, and pull. You should see bubbles coming from both slits.
Pro Tip: Wet the outside of the stem with a drop of water before you push it in. Silicone grips glass hard when dry, and a little water lets it slide into place without forcing it.
For joint sizes and what fits what, see our downstem and bowl fitment guide.
Silicone bong owners: Keep everything in your setup shatter-resistant.
People who keep breaking stems: Stop replacing glass every few months.
Campers and travelers: It's the piece you're least likely to break on the road.
Worth Noting: We don't have a joint size listed for this downstem, so measure your bong's joint opening and existing stem before you order. If it doesn't match, it won't seal well. Ask us through our contact page if you need help checking.
Silicone is easy (no salt needed). Rinse it in warm soapy water, or soak it in isopropyl alcohol for heavy buildup, then rinse well and let it dry. A pipe cleaner through the center and the slits gets the last bits out.
Warning: Let your bong and bowl cool before pulling the stem to clean it, and never run hot glass under cold water. Keep the silicone away from a direct flame, and don't put it in the dishwasher.
Find a bowl to match in our bowls and downstems, see other downstems, browse our silicone rigs and bongs, or look through everything in our silicone products line.
Discreet shipping in plain packaging. 30-day returns on unused items. Card payments processed securely; we never store your card details.