3″ 14 M 90° ETCHED HOURGLASS SLURPER BOX SET

The 3" 14mm 90° Etched Hourglass Slurper Box Set is a quartz terp slurper banger built for dabbers who care about flavor, efficiency, and a little bit of flex on the coffee table. The hourglass body and etched details give you both smooth function and solid grip, while the included 30mm x 4mm pillar helps keep heat and concentrates moving exactly where you want them. If you run a 14mm, 90° rig and want better use of every drop, this is a clean upgrade.

What You Get Out of It

• More flavor, less waste — Hourglass slurper design pulls oil into the dish and up the walls so concentrates actually get vaporized instead of pooling and burning.
• Longer heat retention — The chunky 30mm x 4mm pillar acts as a heat sink, keeping temps stable so you’re not rushing every dab.
• Clean, controlled airflow — Slurper-style architecture keeps airflow tight and consistent, which means smoother, more satisfying pulls.
• Comfortable handling — Etched accents aren’t just for looks; they add a bit of texture so you’re less likely to fumble when you’re a few dabs deep.
• Dialed for 14mm daily drivers — 14mm, 90° male joint plays perfectly with most modern rigs without weird angles or adapters.
• Ready-to-gift box set — Comes with the etched cap and pillar in a box, so it’s easy to keep together or hand off as a present.

Best For

This set is made for dabbers who already have a favorite rig and just want their quartz to catch up. If you’re running mid-size rips, like to taste your terps, and hate watching oil crust up in flat-bottom bangers, this hourglass slurper is a real upgrade. It also fits right in with anyone slowly dialing in a full dab pad and mat setup where everything has its place.

How to Use It

The hourglass slurper works by pulling your concentrate into the lower dish and then slurping it up through the center as you draw, spinning that 30mm x 4mm pillar while it goes. That motion keeps oil moving across hot quartz instead of sitting in one spot and burning, which is why slurpers are known for better flavor and more complete use of your dab.

Set it up like any other 14mm, 90° quartz banger on your rig, drop the pillar into the barrel, and cap it with the etched top once you’re ready to go. Keeping everything over a nonstick surface like a PTFE sheet or liner makes it easier to catch stray drips and protect your table.

Between seshes, a quick wipe while the quartz is still warm (but not glowing hot) keeps it from getting cloudy. When you’re done for the night, let everything cool and tuck it back into the box so you’re not hunting for the pillar or cap next time.

Specifications

What's in the Box

• 1 × 3" 14mm 90° Etched Hourglass Slurper (quartz)
• 1 × Etched cap
• 1 × 30mm x 4mm quartz pillar
• Box for storage and transport

Care & Cleaning

Let the quartz cool down, then wipe off any visible residue with a cotton pad or paper towel. For deeper cleans, soak the banger, cap, and pillar in isopropyl alcohol, rinse with warm water, and let everything dry fully before your next sesh. Storing your clean set alongside your other dab tools and dabbers keeps the glass from getting knocked around between uses.

Fit & Compatibility Notes

This slurper has a 14mm male joint and is built for rigs with a 90° female joint. If your rig’s joint points straight out or nearly straight up from the body, you’re in the sweet spot; if it leans down at a more aggressive angle, you’re probably on a 45° and should look for a different banger. Pair it with a sturdy piece from our broader smoke shop products lineup if you’re also upgrading your rig at the same time.

FAQ

1. Will this fit my rig?
   If your rig has a 14mm female joint and it sits at 90° (straight out from the piece), you’re good to go. If you’re unsure, compare your current banger or check the angle; for a new rig and quartz combo, you can browse our silicone bongs and rigs for easy-matching setups.
2. Is a terp slurper really that different from a regular banger?
   Function-wise, yes. A standard bucket banger keeps oil in a flat dish, while a slurper pulls oil through the bottom and up the tube, using motion and the pillar to keep concentrates in contact with hot quartz longer. That usually means better flavor and less wasted residue.
3. Can I use this with any type of concentrate?
   It works great with most common concentrates—sugars, badders, rosins, sauces, and more. Just keep your oil stored in proper concentrate jars so it stays fresh and easy to work with when you’re loading the slurper.
4. How fragile is the pillar and cap?
   They’re quartz, so they’re made to handle heat, but they’re still glass—dropping them on a hard floor can chip or crack them. That’s why the box is nice to keep around; it gives you a dedicated spot to stash everything instead of letting pieces roll around in a drawer.
5. How often should I deep clean it?
   It depends how often you dab and how clean you like your quartz. If you’re wiping it down warm after most seshes, a deeper soak in isopropyl alcohol once in a while is enough. People running heavy daily use usually notice when function drops or quartz starts to cloud and use that as the cue to fully reset it.
6. Will this work with pearl sets or other inserts?
   This set already includes the 30mm x 4mm pillar it’s designed around, and that’s what will give you the best performance. Some dabbers like to experiment with extra pearls or marbles, but just be sure anything you add is quartz and sized reasonably so it doesn’t jam or stress the glass. If you’re building a full rig kit, check out matching accessories in our accessories collection.
7. Is this a good option for a first quartz upgrade?
   If you’re moving up from a cheap import bucket and want to step into slurpers without going fully custom, this is a solid middle ground. It gives you the modern terp slurper experience, a clean etched aesthetic, and a full set (banger, cap, and pillar) at a price that still leaves room in the budget for things like storage and packaging for your concentrates.