$ 44.99
The 2″ 14M 90° Two-Tone Etched Encalmo Banger Box Set is a quartz banger and carb cap combo made for dabbers who care as much about clean function as they do about how their rig looks. Built around a 14mm male, 90° joint and a tall 53mm (2.1 inch) bucket, it’s sized for real dabs—not micro testers. The deep-etched two-tone encalmo design makes your setup look custom while the included matching cap keeps airflow tight and vapor production on point.
This set is made for dabbers who are past the starter kit stage and want a banger that actually matches the vibe of their glass. If your current nail looks crusty in photos or can’t keep up with the size of your hits, this tall 53mm bucket and included cap are a big upgrade. It’s especially clutch for anyone dialing in a dedicated dab station on a dab mat and wanting their glass and quartz to look like they belong together.
Pop the 14mm male joint into any 14mm female 90° joint on your rig and you’re basically ready to go. The tall bucket gives your concentrates room to melt, pool, and vaporize instead of instantly climbing the walls or splashing out when you start spinning the cap.
Use the included carb cap to control airflow over your concentrates—cover the top to trap vapor and then adjust your angle to direct flow across the surface. The longer shape makes it easy to spin or rock the cap without burning your fingers, even when you’re a few dabs deep and not trying to think too hard about technique.
When you’re done and everything has cooled down, it’s a good habit to wipe out any leftover residue so it doesn’t bake on. If you’re keeping a few different bangers in rotation for different strains, storing the extras with your other dedicated dab tools makes it easy to grab the exact setup you want for each sesh.
| Spec | Details |
|---|---|
| Material | Quartz |
| Joint Size | 14mm Male |
| Joint Angle | 90° |
| Overall Bucket Height | 53mm (2.1 inches) |
| Style | Two-tone etched encalmo design |
| Set Type | Quartz banger + matching carb cap box set |
This banger is built for rigs with a 14mm female, 90° joint. That 90° angle is what most modern dab rigs use, so it should drop right into a ton of daily drivers without looking awkward or throwing off your function. If your current setup is more classic tube or beaker style, just make sure you’re working with a 14mm female joint at a 90° angle for the cleanest fit.
The tall 53mm bucket also gives you some extra clearance from the body of the rig, which is nice when you’re using accessories like directional caps or pearls. If you’re piecing together a full silicone travel setup around this, it pairs well with rugged silicone rigs and bongs so you can keep the fragile part limited to just the quartz.
Let the banger cool down before you touch or clean it—thermal shock is how most people crack quartz. Once it’s cool, wipe out any leftover residue. For a deeper refresh, soak the banger and carb cap in isopropyl alcohol, rinse with warm water, and let everything dry fully before your next dab. Keeping it clean not only looks better, but also keeps flavor true and stops old residue from burning onto that etched design.
It will fit any rig with a 14mm female joint at a 90° angle. If your joint is 10mm or 18mm, or it’s a 45° angle instead of 90°, this one won’t seat correctly. Double-check your joint size and angle before you grab it.
This is a full box set—banger and a matching carb cap are both included. If you like having backups or different cap styles, you can always add more from your usual glass or carb cap stash, but you’re ready to dab straight out of the box.
Yes, the 53mm bucket gives you plenty of room to run inserts or pearls if that’s your style. Just be sure whatever you drop in is meant for quartz bangers and sized appropriately so it can spin and move freely without jumping the rim.
Functionally, this banger behaves like a quality quartz bucket—good heat retention and smooth vaporization. The deep-etched two-tone encalmo work is mostly about style, but you’ll appreciate it every time you snap a pic or pass the rig and people actually comment on the banger instead of ignoring it like a basic clear nail.
The etched design is permanent, so normal cleaning won’t remove it. Let the piece cool, then wipe out any residue. For a reset, soak in isopropyl alcohol, rinse well, and let it dry. Avoid scraping hard with metal tools if you can—using proper smoke shop tools and cotton swabs is usually enough.
Yes, it’s built from quartz specifically to handle repeated heating and cooling. If you’re a dab-every-day type, just stay consistent with light cleaning and you’ll keep both the function and the look dialed. For people running multiple rigs or flavors, picking up a few matching sets and storing them with your other dedicated storage and packaging makes it easy to keep everything organized.
Definitely. Since it’s already a matched banger and cap in a set, it’s an easy upgrade gift for anyone who dabs and still uses a random, beat-up nail. Just make sure their rig has a 14mm female, 90° joint so the fit is right. If you’re really going all in, pairing it with some nice glass concentrate jars or extract packaging makes a complete dab-friendly package.