Sold Out
The 1.5 inch Quartz Nectar Tip is a compact replacement tip designed for 10mm nectar collectors and dab straws. Built for dabbers who want clean, flavorful hits without the bulk, this quartz tip heats evenly and delivers the pure taste that glass and titanium alternatives can't match. The four carved marias provide a secure grip in your collector while adding visual detail to a functional piece.
This tip fits dabbers running 10mm nectar collectors who prioritize flavor over convenience. If you've been using a titanium tip and wondering why your terps taste flat, this is the upgrade. It's also the move for anyone who broke their original quartz tip and needs a direct replacement without buying a whole new kit.
Swap this tip into any 10mm nectar collector by inserting it into the joint opening — the four carved marias create enough friction to hold it secure during use. Heat the tip with a butane torch until it glows slightly, then let it cool for 10-15 seconds before touching it to your concentrate. The brief cool-down prevents scorching and keeps those terpenes intact.
Work your way across the surface of your concentrate rather than plunging straight down — you'll get more even vaporization and waste less product. When you're done, let the tip cool completely before handling. A quick wipe with a cotton swab while it's still slightly warm removes most residue.
For deeper cleaning, let the tip cool fully, then soak in isopropyl alcohol for a few minutes. Rinse with warm water and dry before your next session.
| Attribute | Detail |
|---|---|
| Length | 1.5 inches (38mm) |
| Joint Size | 10mm |
| Material | Quartz |
| Design Feature | Four carved marias |
This tip works with any nectar collector or dab straw that accepts a 10mm male joint. If your current setup uses a 14mm joint, this won't fit — you'll need to size up. The 1.5 inch length is standard for most portable collectors, but if you're running a longer water-filtered piece, double-check that this length works with your setup before committing.
The carved marias grip well in most joints, but if your collector has a particularly loose fit, you may want to use a small silicone adapter or look for a tip with a slightly thicker neck.
If your nectar collector has a 10mm joint opening, yes. Most compact and portable collectors use 10mm. Larger water-filtered pieces often use 14mm, so measure yours if you're not sure.
Marias are the decorative bulges or ridges carved into the glass. On this tip, they serve two purposes: they give the tip a more secure grip in the joint, and they add some visual interest to an otherwise plain piece. Four marias is a common design that balances grip with a clean look.
Quartz is more fragile than titanium — drop it on a hard surface and it can crack or shatter. But with normal use and careful handling, a quartz tip lasts indefinitely. Many dabbers keep a backup on hand since they're affordable to replace.
Quartz is chemically inert, meaning it doesn't react with your concentrates or release any flavors of its own when heated. Titanium can impart a subtle metallic taste, especially at higher temperatures. For terpene-focused dabbers, quartz is the standard for a reason.
Heat until you see a faint glow on the quartz, then wait 10-15 seconds before dabbing. If your concentrates sizzle and produce harsh smoke immediately on contact, you're too hot — wait longer next time. If nothing happens, you need more heat. You'll dial in your timing after a few sessions.
No. Electronic collectors have integrated heating elements and don't use torch-heated tips. This is specifically for manual nectar collectors that require an external heat source.
Soak in isopropyl alcohol for 15-30 minutes, then rinse with warm water. For stubborn buildup, use a pipe cleaner or cotton swab while soaking. Let it dry completely before your next use. Keeping your tip clean between sessions prevents flavor contamination and maintains even heating.