2.5" 14mm Glass & Wood Flower Bowl

Glass & Wood Flower Bowl (14mm, 2.5")

A 14mm flower bowl that pairs a clear borosilicate cup with a wood accent on the stem. The wood gives you something cool to grab when the rest of the piece has been heating up, and the frosted (ground-glass) joint seats tighter than the slip-fit cones you'll find on cheaper bowls.

Key Features

• 14mm male joint: The modern standard. Drops straight into any 14mm female water pipe you already own.
• Frosted (ground) joint: Hand-finished ground glass mates tighter than a slip-fit, so you get a cleaner pull and less ambient air sneaking around the seal.
• Wood accent: The wood section on the stem stays cool to the touch. You can pull and re-seat the bowl mid-session without juggling a hot piece of glass.
• Borosilicate cup: Holds up to repeated lighting and scraping without crazing the way thinner soft-glass does.
• 2.5" overall length: Compact enough to drop into a bowl case and tall enough to clear the joint on a standard beaker bong.
• Natural styling: Reads warmer than all-clear glass. Pairs well with wooden ashtrays, wood-grain grinders, and earthier setups.

Who It's For

People who broke or lost the bowl that came with their bong and want something with a bit more character than another piece of clear glass. Smokers who prefer a natural, hand-finished aesthetic over heady or themed bowls. And anyone who's tired of grabbing a glass handle that's been sitting under a lighter for the last ten minutes.

Worth Noting: Wood is a natural material. Each piece's grain and tone will differ slightly from the photo, which is part of the appeal. The wood section is treated to hold up around heat and moisture, but we'd still recommend wiping it down with a dry cloth instead of soaking it in alcohol. The glass cup itself cleans the same as any borosilicate bowl.

Specifications

Care & Maintenance

Rinse the glass cup after each session. Once a week, soak just the glass end in 91% isopropyl alcohol with coarse salt for 15 to 30 minutes, then rinse with hot water. Keep the wood section out of the alcohol bath. Wipe it with a dry or barely damp cloth and let it air-dry fully before storing. If the joint ever feels gritty, run hot water through it to clear stuck resin from the ground-glass finish.

Frequently Asked Questions

Will this fit my bong?

Only if your bong uses a 14mm female joint. Most stock bongs sold in the last decade do, but older pieces or specialty rigs may use 10mm or 18mm joints instead. Measure the inside diameter at the joint, or check the spec sheet that came with your piece, before ordering.

Does the wood get hot?

No. That's the point. The wood accent sits away from the bowl cup, so it stays cool while the glass is in use. You can pull and re-seat the bowl mid-session without burning your fingers, which is a real benefit on longer sessions.

What's the frosted joint for?

Frosted means ground glass. The matte surface mates tighter against a matching ground joint than a smooth slip-fit, so you get less air sneaking around the seal. Most quality bongs use ground joints, and this bowl is built to match that standard.

How do I clean the wood?

Wipe it with a dry cloth, or barely damp if there's visible residue. Don't submerge the wood in iso or hot water. The treatment that keeps it stable around heat won't hold up to long soaks. The glass cup cleans normally; just keep the wood end out of the bath.

Pair it with a clear beaker bong or a wood-grain grinder for a coordinated setup. Browse our flower bowls, bongs, and grinders collections for the rest of the kit.