8″ COOKIES INCYCLER

The 8" Cookies Incycler is a premium glass dab rig built for Cookies fans and flavor chasers who want smooth function and legit branding in one piece. At 8 inches (203mm) tall with a 14mm, 90° joint, it’s sized perfectly as a daily driver that still feels special every time you pull it off the shelf. The incycler design keeps water cycling inside the rig for extra-smooth, well-controlled function without splashes.

Made in collaboration with Wyn Brands, this rig blends clean scientific lines with that unmistakable Cookies aesthetic, from the cookie-cut perc to the etched logos and branded accessories. If you’re the type who actually uses your glass but still wants it to look like a centerpiece, this is right in your lane.

Why this piece hits different

• Smoother pulls with less effort — The incycler continuously recycles water inside the rig, helping cool and condition vapor so your hits feel softer on the throat.
• Less splash, more control — Internal recycling keeps the water moving without sending it up the neck, so you can pull harder without getting a mouthful.
• Ready for real use — A fixed downstem and bridged joint add durability where rigs usually fail, so it can handle being a true daily driver.
• Dialed-in 14mm, 90° joint — Works seamlessly with standard 14mm bangers and accessories, so you can swap in your favorite setup without hunting for adapters.
• Signature Cookie Cut Perc — The custom perc breaks up vapor into smaller bubbles for better diffusion and also adds that recognizable Cookies look inside the can.
• Legit Cookies branding — Etched Cookies logos, a seal of authenticity, and branded accessories make this feel like a complete, collectible setup instead of just another clear rig.
• Table-friendly size — At 8 inches (203mm), it’s compact enough to keep on a desk or coffee table but tall enough to clear comfortably without hunching over.

Best for

This 8" Cookies Incycler is made for dabbers who want more than a basic beaker—people who care about function, brand authenticity, and how their rig actually looks on the shelf. It’s especially solid for anyone running a dedicated dab station with a dab mat and a couple of favorite tools always within reach.

If you’re into flavorful dabs, moderate to heavy daily seshes, and you like rigs that feel both collectible and practical, this one hits that sweet spot. It’s not a giant showpiece you’re scared to touch, but it definitely doesn’t feel cheap or disposable.

How to use it (and actually enjoy it)

Using the Cookies Incycler feels like any solid rig, just with smoother water movement going on behind the scenes. Fill the water through the mouthpiece or joint until the cookie-cut perc is properly covered but not flooded. The magic here is the incycler section: as you pull, water gets drawn up and then drains back down, continuously recycling to cool vapor and reduce harshness.

The 14mm, 90° joint plays nice with most standard bangers, so you can pair it with your go-to nail and set it on a dab tool stand or holder between pulls to keep your station organized. Once you dial in your preferred water level, you’ll notice the function feels tight and controlled—no wild chugging, just a smooth, cycling pull.

After your sesh, give the rig a quick rinse while everything’s still fresh; it’ll keep reclaim from building up in the tight incycler pathways. When you want to stash your concentrates until next round, parking them in proper concentrate jars will help keep your flavor on point and your rig from getting gunked up too fast.

Cleaning is simple: let everything cool, empty the water, rinse, and when it needs a deeper refresh, soak the piece in isopropyl alcohol, rinse thoroughly, and let it dry before you bring it back into rotation. No special tools required.

Specifications

What's included

• 8" Cookies Incycler glass rig
• Cookies etched bowl — perfect if you ever want to run flower through it instead of concentrates
• Santa Cruz Shredder — a high-quality grinder to round out the setup
• Official Cookies sticker — for your case, tray, or wherever you rep your gear
• Designer box — adds to the collectible vibe and keeps everything safe if you store or gift it

Fit & pairing notes

The 14mm, 90° female joint is pretty much the standard sweet spot for dab rigs, so it plays well with most 14mm male bangers and dropdowns you already own. If you’re building a full Cookies-inspired setup, you can round it out with silicone or glass gear from our wider smoke shop products collection to keep everything feeling cohesive.

Because it’s an incycler, it shines with consistent, controlled pulls rather than super aggressive chugging. If you prefer tiny, ultra-micro rigs or huge party-table pieces, this lands right in the middle as a balanced, daily driver size.

FAQs

Will this work with my existing 14mm banger?

Yes. The rig has a 14mm female joint set at 90 degrees, which is standard for most 14mm male bangers and quartz nails. As long as your banger is 14mm male, it should drop right in without needing an adapter.

Can I use this rig for flower too?

You can. It comes with a Cookies etched bowl, so if you want to swap from dabs to flower, just trade out your banger for the bowl. If you’re mostly a flower person and like to keep everything fresh and organized, pairing this with proper storage and packaging for your herb will help lock in flavor between seshes.

Is the incycler harder to clean than a regular rig?

Not really. There are more internal paths for water, but cleaning is still straightforward: empty the water, rinse, and when it needs it, soak with isopropyl alcohol, rinse again, and air dry. Regular quick rinses will keep the inner recycling section from building up heavy reclaim.

Does this come with everything I need to start dabbing?

It includes the rig, a Cookies etched bowl, a Santa Cruz Shredder, and branding extras, but it does not list a banger by default—so you’ll want to pair it with a 14mm male quartz banger or nail. If you’re building out a full dab kit, you can grab tools, caps, and more from our accessories lineup to round things out.

What’s the advantage of an incycler over a regular rig?

Incyclers keep the water moving in a loop inside the rig, which helps with smoother, more consistent function and usually less splashback. Many dabbers feel they get better flavor and a more controlled pull because the water is constantly recycling around the vapor instead of just bubbling once and sitting there.

How much water should I put in it?

Fill until the perc is covered and the recycling section has enough water to circulate, but not so much that it wants to climb into the neck. You can fine-tune by adding or removing small amounts until you find the balance of function and drag that feels right for you. Keeping it on a stable base like a silicone bong or rig station can help avoid spills while you’re adjusting.

Is this more of a collector piece or a daily driver?

Honestly, both. It’s got the look and branded presentation of a collector piece, thanks to the Cookies logos, Santa Cruz Shredder, and designer box. But the fixed downstem, bridged joint, and 8" incycler design make it fully capable as a daily driver for regular dabbers who actually put their glass to work.