2MM QUARTZ BANGER

The 2mm Quartz Banger is a reliable, affordable nail for dabbers who want clean flavor without overthinking their setup. Available in all standard joint sizes (10mm, 14mm, 18mm) with both male and female options at 45° and 90° angles, this banger fits virtually any dab rig on the market. The 2mm wall thickness heats quickly and is forgiving for those still dialing in their torch technique.

Key benefits

• Pure quartz construction — no metallic aftertaste, just clean vapor that lets your concentrates shine
• 2mm walls heat up fast — ready to dab in under 30 seconds with a standard butane torch
• Every joint configuration covered — 10mm, 14mm, and 18mm in male or female, 45° or 90° angles
• Budget-friendly replacement — swap it out when it gets cloudy without stressing your wallet
• Works with most carb caps — standard bucket design pairs with bubble caps, directional caps, and spinners

Best for

This banger suits dabbers who prioritize function over flash. It's a solid choice if you're new to concentrates and still learning heat management, or if you need backup nails for multiple rigs without buying premium glass for each one. Experienced dabbers often keep a few of these around as daily drivers — save the fancy stuff for special occasions.

How to use it

Drop the banger into your rig's joint (make sure you've matched the size, gender, and angle correctly). Heat the bottom and lower walls with your torch until the quartz glows slightly, then let it cool for 30-45 seconds depending on your preferred temperature. Lower temps (around 450-550°F) preserve terpenes and flavor; higher temps produce thicker clouds but can taste harsh.

Once cooled to your target range, drop your concentrate into the bucket and cap it immediately. The 2mm thickness doesn't retain heat as long as thicker bangers, so work quickly. After your dab, swab the inside with a cotton swab while it's still warm to prevent residue buildup. This habit keeps your quartz clear and your flavor clean session after session.

For deeper cleaning when things get gunky, let the banger cool completely, then soak it in isopropyl alcohol. A quick torch burn-off can remove stubborn carbon, but do this sparingly — repeated thermal shock shortens the lifespan of any quartz piece.

Specifications

Fit and compatibility

Before ordering, check your rig's joint. If your rig has a female joint, you need a male banger (and vice versa). The angle matters too — most traditional beaker bongs use 45° joints, while straight tubes and smaller rigs often use 90°. When in doubt, measure the inner diameter of your joint with a ruler or compare to a known piece.

This banger plays nice with standard dab tools and most carb caps designed for bucket-style nails. Terp pearls work fine in the bucket, though the 2mm walls cool faster than thicker options, so spinner caps may not get as much rotation time.

Limitations worth knowing

Thinner walls mean faster heat-up but also faster cool-down. If you're taking multiple dabs back-to-back, you'll be reheating more often than with a 3mm or 4mm banger. The tradeoff is worth it for casual sessions, but heavy users might want something beefier for marathon seshes.

Quartz naturally develops a cloudy appearance over time, especially with dark concentrates or high-temp dabs. Regular swabbing and occasional iso soaks slow this down, but eventually any banger needs replacing. At this price point, that's not a big deal.

Frequently asked questions

Will this fit my 14mm bong?

Probably, but check the gender and angle first. If your bong has a 14mm female joint at 45°, you need the 14mm male 45° banger. The joint sizes are industry standard, so as long as you match those three specs (size, gender, angle), you're good.

How long should I heat it?

With 2mm walls, about 20-30 seconds of direct torch heat gets you there. Then cool for 30-45 seconds before dropping your dab. Every torch is different, so experiment to find your sweet spot. If your concentrate burns instantly and tastes harsh, you're going in too hot.

Can I use terp pearls with this banger?

Yes, terp pearls fit in the standard bucket design. Pair with a spinner cap for best results. Just know that the thinner walls cool faster, so you might get less spin time compared to thicker bangers.

How do I keep it from getting cloudy?

Swab with a dry cotton swab after every dab while the quartz is still warm. This removes residue before it burns on. For deeper cleaning, soak in 90%+ isopropyl alcohol. Avoid cold-starting a dirty banger — the gunk will bake on permanently.

What's the difference between 2mm and thicker bangers?

Thicker walls (3mm, 4mm) hold heat longer, which is better for low-temp dabs and multiple hits. The 2mm heats faster and is more forgiving for beginners, but you'll reheat more often during longer sessions. It's a tradeoff between convenience and heat retention.

Do I need a carb cap?

Technically no, but practically yes. A carb cap traps heat and creates airflow that vaporizes your concentrate more efficiently. Without one, you'll waste product and get weaker hits. Any standard bubble or directional cap works with this bucket style.

How long will this banger last?

Depends on use and maintenance. With proper care (regular swabbing, no extreme thermal shock), expect several months of daily use before cloudiness becomes a real issue. At this price, many dabbers treat them as semi-disposable and replace every few months. For more on maintaining your quartz, Leafly's dabbing guide covers the basics.