ONLY QUARTZ HOLLOW FOOT AUTO SPINNER BANGER

The ONLY QUARTZ Hollow Foot Auto Spinner Banger is a high-end quartz banger built for dabbers who actually care what their terps taste like. It’s made from full weld quartz with a 25mm hollow foot, so you get even heat and serious spin without babying it every sesh. If you’re running pearls and want smooth, efficient vaporization with less waste stuck to the walls, this is the kind of banger you upgrade to and keep in rotation.

Why It Hits Different

• Real vortex spin — Two angled intake holes pull air in a spiral, so your 4mm pearls actually move instead of just rattling around.
• Even heat across the bottom — The 25mm hollow foot spreads heat under your puddle instead of concentrating it in one hot spot.
• Flavor over flash — Clean quartz, clean welds, and a beveled top give you smooth seals and clean vapor so you taste your terps, not burnt residue.
• Built to be a daily driver — Full weld construction means fewer weak points and better durability for dabbers who are heating this thing multiple times a day.
• Controlled airflow — The 12mm top marble (sold separately) works with the hollow foot and angled holes to keep your airflow steady and your concentrate moving.
• Ready to spin out of the box — Comes with two 4mm pearls, so you don’t have to hunt for matching inserts before your first sesh.

Best For

This banger is made for dabbers who already know the difference between a decent banger and a good one, and are ready for something that can hang with their routine. If you’re doing multiple dabs a day, experimenting with different textures, or dialing in flavor on a daily driver rig, this is the type of quartz that makes it feel worth it. It pairs especially well with stable setups like heavy glass or sturdy silicone bongs and rigs so you’re not stressing about knocking it over.

The Basics: How to Use It

Drop the ONLY QUARTZ Hollow Foot Auto Spinner Banger onto your favorite rig, add the included pearls to the dish, and cap it with your preferred marble or carb setup. Heat the quartz until it reaches your preferred temp range, then introduce your concentrate into the hollow foot area so the angled air holes and pearls can do the work, keeping your puddle moving and vaporizing evenly.

The hollow foot design shines when you keep your setup stable and clean. Parking your rig on a solid dab mat helps keep your table clean and gives your banger a safe landing spot between heats so you’re not chasing sticky tools around the coffee table.

After you’re done, let the banger cool down before touching or cleaning it. For regular maintenance, a quick wipe while it’s warm (not hot) keeps it looking clear; for deeper cleans, let it cool completely, then soak in isopropyl alcohol, rinse, and dry before the next sesh.

Specifications

Fit & Setup Notes

This banger is designed to drop into most rigs that take a standard quartz banger, making it an easy swap from a basic bucket or non-spinner style. To really get the most out of it, pair it with a cap or marble setup that lets those angled holes breathe so you can see the pearls take off. Between runs, keep your concentrates staged in proper concentrate jars so they’re fresh and ready when your quartz is.

What You Get

• ONLY QUARTZ Hollow Foot Auto Spinner Banger (quartz)
• Two 4mm quartz pearls
• Sticker(s) from the brand

FAQ

1. Will this banger fit my current rig?
   If your rig is already running a standard quartz banger, this should swap in without drama, as long as the joint size and angle match what you have now. If you’re building a fresh setup, you can find plenty of compatible pieces in our general smoke shop products collection to build out a full kit around this banger.
2. Do I have to use the included pearls?
   You don’t have to, but this banger is built around spin action, so the pearls really unlock its design. The angled holes and hollow foot are meant to keep your concentrate moving; without pearls you’ll still get good function, just not the same vortex effect.
3. How should I clean the quartz without ruining it?
   Let it cool down first so you’re not shocking hot quartz. Then wipe away residue with a cotton swab; for a deeper clean, soak the cooled banger and pearls in isopropyl alcohol, rinse with warm water, and dry fully before reheating. Keeping your dab tools clean too helps keep reclaim and burnt bits out of the dish, so it’s worth grabbing proper dab tools instead of random metal picks.
4. What’s the point of the hollow foot versus a regular bucket?
   The hollow foot gives your concentrate more surface area to move around on, while the angled holes create airflow that keeps it spinning instead of pooling in one spot. That means more even vaporization, better flavor, and less waste cooked onto the floor of the banger over time.
5. Do I need a special carb cap or marble for this?
   You don’t need something exotic, but you do want a cap or marble that seals well on the 12mm beveled top while letting air through those angled intake holes. Directional caps and marble/pillar stacks both work well here, similar to what you’d use on other high-end quartz or carb caps made for spinner-style bangers.
6. Is this overkill if I only dab once in a while?
   If you’re an occasional dabber, it might feel like a fancy upgrade, but the benefit is you’ll get better flavor and cleaner hits even when you’re not dabbing every day. That said, heavy daily dabbers will notice the durability and consistency the most, especially compared to cheaper quartz that clouds or chips quickly.
7. How should I store everything when I’m not using it?
   Let the banger cool fully before putting it away, and avoid tossing it in drawers where it can knock against other glass. Keeping your rig, banger, and inserts together on a shelf or in a padded case works well. For the concentrates themselves, stash them in proper storage and packaging so they stay fresh between seshes and don’t end up smeared on random silicone scraps.