3″ 14 M 90° TOWER SLURPER SET W/ ETCH PILLAR & DICHRO MARBLE

The 3" 14mm Male 90° Tower Slurper Set with Etched Pillar & Dichro Marble is a heavy-hitting quartz banger setup built for dabbers who care about flavor, efficiency, and showpiece-level function. It’s made for people running real concentrate seshes, not just “once in a while” dabs, with a full weld design that can handle heat and daily use. At 3 inches (76mm) tall with a 25mm etched pillar and 12mm dichro top marble, this set is all about keeping your oil moving, your hits smooth, and your rig looking dialed.

What You Get Out of It

• Better use of every dab — Tower slurper design pulls oil up and around the pillar so your concentrates actually get used instead of pooling and burning.
• Clean, terp-forward flavor — High-quality quartz means you’re tasting your extract, not your hardware.
• No sketchy weak points — Full weld construction between the bucket and joint adds strength where cheaper bangers usually crack.
• Reliable seal and spin — Beveled bucket lip works with the marble to keep air moving while still sealing the top for proper pressure.
• Satisfying visual function — Etched pillar and dichro marble turn each dab into a little show as the pillar spins and the oil climbs.
• Easy rig upgrade — Standard 14mm male, 90° joint plays nicely with most modern dab rigs without adapters.

Best For

This set is made for dabbers who have moved past basic buckets and want something that really milks the rig without wasting concentrate. If you’re running cold starts, lower-temp dabs, or just like watching your oil spin instead of scorch, this tower slurper is in your lane. It’s also a strong choice if you’re building a daily driver rig and want quartz that can keep up with multiple seshes a day.

Dial it in as the centerpiece of a full dab station by pairing it with a solid dab pad or mat so you’re not setting hot quartz straight on the table.

How to Use It

Drop the pillar into the center of the tower and set the dichro marble to the side while you heat the banger. After you’ve brought the bucket up to temp and let it cool to your preferred range, place the marble on top, add your concentrate into the dish area, and watch the airflow pull oil up around the pillar. The etched surface helps the pillar catch and spin, keeping oil moving so it vaporizes evenly instead of pooling.

For smoother, less messy seshes, use a proper dabber from our dab tools collection so you can place your concentrate exactly where you want it inside the slurper. After you’re done, let the quartz cool down, then swab out the bucket. For deeper cleans, soak in isopropyl alcohol, rinse with water, and dry fully before heating again.

Specifications

Fit & Compatibility

This Tower Slurper Set is built for rigs with 14mm female joints and a 90° angle. If your rig’s joint is 45° or a different size, you’ll either want an adapter or a different banger style. The 25mm pillar and 12mm marble are sized specifically for this tower, so you get proper spin and airflow without constantly losing pieces off the top.

If you’re pairing this with a silicone or hybrid piece, check out our lineup of silicone bongs and rigs — they’re a nice match when you want unbreakable glass-free bases with high-end quartz up top.

Care Tips

Quartz lasts longer and hits cleaner when you don’t cook it red-hot every time. Let things cool between seshes, avoid dropping the hot piece on cold surfaces, and don’t force the marble off while it’s still hot. For regular maintenance, a quick swab after each dab is usually enough; for heavy buildup, a short soak in isopropyl alcohol, rinse, and dry will bring it back.

FAQ

• Will this fit my current rig?
  If your rig has a 14mm female joint at a 90° angle, you’re good to go. If you’re not sure, pull the current banger out and check the joint size marking or compare against another known 14mm piece.
• Can I use different marbles or pillars with this?
  You can swap in other marbles or pillars as long as they’re close in size (around 12mm for the top marble and 25mm for the pillar). Just know that going too big can choke airflow, and going too small can kill the spin and function.
• How do I keep it from chazzing or getting cloudy?
  Let it cool a bit before each dab, avoid burning puddles dry, and swab out the bucket after use. When it does start to look hazy, a soak in isopropyl alcohol followed by a rinse and full dry will help keep the quartz looking clean.
• Is a tower slurper really that different from a regular bucket banger?
  Yeah. Instead of just dropping oil into a flat bucket, the tower slurper pulls concentrate up and around the etched pillar. That extra movement and surface contact helps vaporize more evenly and can make lower-temp hits feel more satisfying and less wasteful compared to standard buckets.
• Do I need a carb cap with this, or is the marble enough?
  The 12mm dichro marble acts as the cap for this setup, sealing the top and letting the slurper create that signature airflow. You don’t need a separate traditional carb cap for it to function properly, though some people like pairing it with other carb caps on different bangers in their rotation.
• How should I store this when I’m not using it?
  Let it cool fully, wipe it down, and keep the pillar and marble together so you’re not hunting for pieces before the next sesh. If you’re working with a lot of different concentrates, keeping everything organized alongside your jars and tools in a dedicated storage and packaging setup makes life easier.
• Is this overkill for a casual dabber?
  If you only take a dab once in a long while, a simpler banger might be fine. This tower slurper really shines for people who dab regularly and actually notice differences in function, flavor, and how much oil they’re saving. It’s the kind of upgrade you appreciate more the more you use it.

If you’re building out a full rig kit around this piece, you can round it out with other dialed-in smoke shop gear so your whole setup feels as intentional as your quartz.