7.5″ MONARK COLOR INLINE RIG

The 7.5″ MONARK Color Inline Rig is a compact glass dab rig built for flavor chasers who want smooth, filtered hits without a bulky setup. At 7.5 inches (190mm) tall with a 14mm male joint and included 90° banger, it’s sized perfectly as a daily driver that still rips. The inline perc runs horizontally along the base, stacking bubbles for cleaner, cooler pulls while the color accents keep it looking sharp on the table.

Why You’ll Actually Use This Rig

• Comfortable daily driver size — 7.5 inches (190mm) is tall enough for solid function, short enough to stash or pass around easily.
• Smoother, less harsh hits — the inline perc spreads smoke across multiple slits, sending it through more water for a softer pull.
• Ready out of the box — comes with a 90° banger matched to the 14mm male joint, so there’s no guessing on sizing.
• Stable and balanced — the horizontal inline section keeps the weight low, so you’re not stressing every time someone bumps the table.
• Clean flavor — simple, direct path from banger to mouthpiece helps preserve terps instead of over-chilling or over-diffusing them.
• Looks good on the shelf — bold Monark color accents give it that “nice piece” vibe instead of looking like lab glass.

Best For

This rig is made for dabbers who want a legit upgrade from cheap glass without going full art piece. If you’re running a few dabs a day and want something that stays comfortable, easy to clean, and consistent, this fits right in as your main rig. It also pairs nicely with unbreakable travel gear like our silicone bongs and rigs if you like keeping glass at home and silicone for on-the-go.

How to Use It (The Basics)

Fill the rig so the inline perc is just slightly covered with water — you want the slits fully submerged, but not drowning. When you pull, watch for tight, fast bubbles along the inline; that’s how you know it’s doing its job. Too much water and it’ll feel draggy, too little and you’ll lose the smoothness.

The 14mm male joint is already matched to the included 90° banger, so you’re set up for concentrates without having to hunt for compatible glass. Set the rig on a solid surface or a nonstick dab mat to catch any drips and keep your station clean while you work.

When you’re done, let everything cool before you touch the banger. For cleaning, a quick rinse after use keeps reclaim from building up; when it’s really time for a reset, a soak in isopropyl alcohol, rinse, and dry will bring the glass back to clear.

Why Inline Percs Hit Different

An inline perc is basically a horizontal tube with multiple slits or holes cut along the bottom. As you pull, vapor is forced through those cuts and broken into smaller bubbles. Smaller bubbles = more surface area touching the water, which means more cooling and a smoother pull without needing a giant chamber.

Compared to big tree percs or stacked chambers, an inline setup like this keeps drag lower and maintenance way simpler. You get that satisfying chug and diffusion, but you’re not scrubbing a forest of tiny arms every weekend. If you like rigs that feel responsive and easy to clear, this inline design hits that sweet spot.

Specifications

What’s Included

• 7.5″ MONARK Color Inline Rig (glass)
• 14mm 90° banger (matched to the rig’s joint)

Fit & Compatibility

The rig comes with a 14mm male joint and 90° angle, which is the standard setup for a ton of dab accessories. Most 14mm female bangers, recyclers, and attachments designed for 90° joints will play nice here. If you’re stocking up on gear for multiple pieces, it’s a good idea to keep everything in one size family and organize them in your stash or storage and packaging so you’re not guessing threads and joints later.

Care & Maintenance Tips

Rinse the rig with warm water after heavier seshes to keep the inline perc from clogging with reclaim. When it starts to look cloudy or feel sticky, soak the glass in isopropyl alcohol, then rinse thoroughly with water and let it dry before using again. Avoid knocking the inline section or joint against hard surfaces — like all glass, it can chip or crack if it takes a bad hit.

FAQ

Does this rig come with everything I need to start dabbing?

It comes with the rig and a 14mm 90° banger, so the glass side of your setup is covered. You’ll still want basics like a dab tool and a carb cap; if you’re building out a full kit, check out our selection of dab tools to round things out.

Will this work with my existing 14mm accessories?

Yes, if you already have 14mm female accessories designed for a 90° joint, they should fit the 14mm male joint on this rig. Just make sure they’re also sized for concentrates and not flower bowls if you’re planning to dab with it.

How hard is it to clean the inline perc?

Inline percs are easier to clean than a lot of multi-arm or multi-chamber designs. A soak in isopropyl alcohol followed by a warm water rinse usually clears out built-up reclaim. For the banger, giving it regular quick cleanups helps keep flavor fresh, especially if you’re working with quality material you’re also storing in proper glass jars and extract packaging.

Is 7.5 inches too small for bigger dabs?

7.5 inches is a sweet spot for concentrate rigs — it’s compact but not tiny. The inline perc and water volume give you enough cooling for normal to heavier dabs, without the piece feeling oversized or awkward to pass around.

Can I use this for flower with a different bowl?

Technically, you can swap the banger for a 14mm female flower bowl and use it that way. Just keep in mind it’s designed as an oil rig; the chamber size and perc style are optimized for concentrates, not full flower lungs. If you’re a flower person first and foremost, you might want a separate piece or one of our more general smoke shop products built around bowls.

Does the color affect durability or function?

No, the color is purely aesthetic. It doesn’t change the way the inline perc functions or how thick the glass is — it just makes the rig look better on your desk, tray, or next to your carb caps.

Is this a good choice as my first “real” rig?

Yes, this is a solid starter-into-midrange rig: simple function, easy maintenance, standard 14mm sizing, and no weird custom joints. If you’re upgrading from a cheap mini rig or pen and want something that will stay in rotation for a long time, this Monark inline is a smart, no-drama pick.