10″ WORMHOLE CUBE INLINE RIG

The 10" Wormhole Cube Inline Rig is a heady-style glass dab rig built for concentrate fans who care about flavor and function as much as looks. That cube body with the wormhole cutouts isn't just for show—it pairs with the inline perc to spin and diffuse your hits for a smoother rip. At 10 inches (254mm) tall with a 14mm 90° joint and included banger, it's dialed in as a daily driver that still feels special on the table.

The bent neck keeps heat and splash away from your face, while the heavy base keeps everything stable when you're passing it around or loading another dab. Blue accent glass gives it just enough color to pop without being loud.

Why You'll Actually Use This Every Day

• Smoother, cooler hits — Inline perc runs the vapor through multiple slits, increasing diffusion so each pull feels easier on the throat.
• Flavor-forward function — The compact cube body and straight inline path keep the hit tight and tasty, so you get more terps and less harshness.
• Comfortable angle — Bent neck and 90° joint keep the banger away from your face and make it easy to see what you're doing while you work.
• Stays put on the table — Wide, heavy base helps prevent accidental tips when you're a few dabs in or someone bumps the coffee table.
• Ready out of the box — Comes with a matching 14mm (90°) banger so you don't have to hunt for parts just to get your first sesh in.
• Easy to clear and control — Medium 10" (254mm) height gives you enough volume for satisfying pulls without feeling like you're clearing a giant bong every time.

Best For

This rig is made for dabbers who run regular seshes and want one solid piece that can hang with anything you throw at it. If you like clean function, inline diffusion, and a rig that looks good on the shelf without screaming for attention, this checks the boxes. It's also a great "show your friends how dabs are supposed to feel" piece—easy to pass, not too tall, and stable enough that you're not stressing about it getting knocked.

If you're already building a full dab station with a dab pad or mat under everything, this cube rig fits right in as the centerpiece.

How to Use It

The Wormhole Cube Inline Rig works like a classic concentrate rig: water in the base, banger in the joint, and you're off. Keep the water level just over the inline perc so all the slits are covered—too low and you lose diffusion, too high and you're flirting with splashback.

The bent neck makes it easy to line up your face naturally with the mouthpiece while still keeping your eyes on the banger. The inline perc sits horizontally along the bottom, so as you pull, vapor is forced through multiple small slits, breaking it up into bubbles. That extra contact with the water cools things down and takes the edge off bigger dabs.

Between rips, you can park the rig on your station and keep your concentrates sealed up in proper concentrate jars so they're not drying out or collecting dust between seshes.

Cleaning is simple: let everything cool completely, dump the old water, then rinse. For deeper cleans, soak the rig in isopropyl alcohol, rinse well with warm water, and let it dry before using again.

Specifications

Because it uses a standard 14mm 90° male joint, this rig plays nicely with most 14mm female-accessory setups—swapping in different bangers or carb caps is straightforward if you like to customize your function.

Fit & Function Notes

The 10" height is that sweet-spot size: big enough that hits have time to cool and stack, but compact enough to feel like a true rig and not a giant water pipe. The cube body gives you a stable footprint without taking up half the table.

The inline perc is ideal if you like consistent chug over super-choppy diffusion—each slit does its job, giving you smooth, even bubbles without feeling like you're pulling through a super-restrictive perc stack. Pair it with your favorite banger and a dependable tool from the dab tools collection and you've got a setup that actually makes sense day-to-day.

FAQ

• What joint size does this rig use?

  The Wormhole Cube Inline Rig uses a 14mm male joint at a 90° angle. Any 14mm female banger or accessory with a 90° design should fit just fine.

• Does it come with everything I need to start dabbing?

  It includes the rig itself and a matching 14mm (90°) banger, so you're covered on the glass side. You'll still want a proper dab tool and a stable surface like a smoke shop-ready dab station setup to keep everything organized.

• Can I use a different banger or nail with this rig?

  Yes. As long as it's a 14mm female, 90° banger or nail, it should work. Quartz, ceramic, or titanium options all play fine—just match the joint size and angle.

• How much water should I put in?

  Fill until the inline perc is fully submerged and the slits are covered when the rig is upright. Too much water and you risk splashback; too little and you won't get the smoothing effect from the perc.

• What's the best way to keep it clean?

  Dump the water after your sesh instead of letting it sit, and give it a quick rinse. When it starts to look cloudy or sticky, soak in isopropyl alcohol, rinse thoroughly with warm water, and let it dry. Keeping your concentrates in sealed storage containers also helps cut down on residue and mess.

• Is this rig good for big dabs or just small ones?

  The inline perc and 10" body handle both nicely. Smaller dabs feel super smooth, and when you step it up, the extra diffusion and volume help keep bigger hits from feeling too aggressive.

• Can I travel with this rig?

  It's glass, so you'll want to be careful—think padded case or original packaging if you're moving it around. For something truly throw-in-the-bag friendly, check out the more durable options in our silicone bongs & rigs section and keep this cube rig as your at-home centerpiece.