12″ MONARK GRID PERC INCYCLER

The 12″ Monark Grid Perc Incycler is a tall, premium glass dab rig built for dabbers who care about flavor, smoothness, and showpiece-level function. At 12 inches (305mm) with a grid perc and incycler cooling, it’s made for people running real seshes, not just “test hits.” The footed can base and bent neck keep it comfortable and stable while you push big, milky pulls.

Why it hits different

• Smoother, cooler rips — The incycler design constantly recirculates water around the grid perc, knocking down harshness before it ever hits your throat.
• Flavor stays on point — Grid perc diffusion breaks vapor into tiny bubbles without over-chopping it, so you keep terps instead of washing them out.
• Stays put on the table — Footed can base gives you way more stability than skinny-tube rigs, so one clumsy elbow is less likely to end in heartbreak.
• Comfortable angle, less neck strain — The bent neck brings the mouthpiece to you, so you’re not hovering over the table or craning your back mid-sesh.
• Ready to dab out of the box — Comes with a 14mm male 90° banger, so you can toss it in rotation with your other 14mm gear right away.
• Great daily driver size — At 12 inches (305mm), it’s big enough for heavy hitters but still manageable to clean, move, and stash.

Best for

This rig is made for dabbers who have outgrown tiny starter rigs and want legit function they can feel in every pull. If you’re doing multiple dabs per sesh or sharing with the group, the incycler design helps keep things smoother hit after hit. It also fits right into a serious glass lineup as your main recycler-style daily driver or as the “show me something nice” piece you pull out next to your other premium smoke shop products.

How to use it

Function-wise, the 12″ Monark Grid Perc Incycler is all about recirculating water for consistent cooling. When you pull, vapor and water are drawn through the grid perc at the bottom of the can. That grid chops the vapor into tons of small bubbles, increasing surface contact with the water for smoother hits.

From there, the incycler kicks in: water gets pulled up and around the internal pathways, then drops back into the main chamber in a loop. You’ll see that classic incycler “chug and swirl” as the water drains back down while you’re still clearing the hit. It looks cool, but more importantly, it keeps fresh, moving water around the vapor so you’re not just recycling hot, stale water.

Set the rig on a flat surface (a dedicated dab pad or mat works great) with enough room to move your torch or e-nail around comfortably. Use the included 14mm male 90° banger or swap in your preferred 14mm 90° setup, and you’re ready to dial in your ritual.

For cleaning, let everything cool down completely, then wipe off residue around the joint and banger. When it’s time for a deeper reset, soak the glass in isopropyl alcohol, rinse well with warm water, and let it dry fully before your next sesh.

Specifications

What's included

• 1 × 12″ Monark Grid Perc Incycler (glass dab rig)
• 1 × 14mm male 90° banger

Fit & compatibility

This rig is built around a 14mm male, 90° joint, which is pretty much the standard for most modern dab setups. That means it plays nice with most 14mm 90° bangers, terp slurpers, and compatible e-nail heaters you might already own. If you’re upgrading from a smaller rig, this can easily step in as your main piece without needing to replace all your accessories.

Because it’s an incycler with a grid perc, you’ll get best results using a banger with decent thermal mass and pairing it with a proper cap. Directional or bubble caps can help you really spin your puddle and make the most of the diffusion coming off that grid perc, just like you would on our dedicated carb caps and airflow-focused accessories.

FAQ

• Will this work with my current banger?
  If your banger is 14mm and designed for a 90° joint, it should fit right in. This rig ships with a 14mm male 90° banger, so if you’re used to running that size and angle, you’re good to go.
• Can I use an e-nail with this rig?
  Yes, as long as your e-nail coil and nail are made for a 14mm 90° setup, they’ll pair nicely with this piece. Just make sure the coil sits securely and that the rig is on a stable surface, like a non-slip accessory mat or stand, so you’re not bumping hot hardware.
• Is a 12″ incycler too big for daily use?
  Not at all. 12 inches (305mm) is a sweet spot for a daily driver if you want smoother hits without going into giant tower territory. It’s tall enough to cool things down and show off the incycler function but still easy to move from desk to coffee table.
• How hard is this to clean compared to a simple rig?
  The incycler has more internal pathways than a basic beaker or straight tube, but it’s still very manageable. Let everything cool, rinse, and when it needs a refresh, soak with isopropyl alcohol, rinse thoroughly, and let it dry. Keeping your concentrates stored cleanly in proper concentrate jars can also help reduce funk buildup over time.
• Can I travel with it or is it more of a stay-at-home piece?
  It’s definitely more of a home-base rig, but you can bring it to a friend’s place if you’ve got good padding and a safe spot to set it down. For true throw-in-the-backpack situations, you might want to add a smaller piece from our durable silicone bongs & rigs lineup and keep this Monark incycler as your at-home flex.
• What kind of dabbing style is this best for?
  This rig shines for people who like steady, flavorful dabs—whether you’re into lower-temp, terp-focused hits or stacking a few back-to-back. The incycler function helps keep water moving and cooling, so it keeps up when the sesh goes from “a quick dab” to “everyone’s taking another round.” Pair it with quality rosin tools and handling gear from our rosin extraction collection for a full, dialed-in setup.
• Is the grid perc really that different from a regular perc?
  Yeah, you’ll notice the difference. A grid perc has multiple small openings that break vapor into fine bubbles, which increases contact with the water without making the pull super draggy. Compared to basic downstems or single-slit percs, it’s smoother, more controlled, and way more satisfying to watch—especially combined with the incycler’s drain.