2″ 14MM REVERSAL SNAPPER W/ HANDLE FLOWER BOWL

The 2" 14MM Reversal Snapper w/ Handle is a compact glass flower bowl built for bong smokers who like quick, punchy snaps instead of huge pack-and-pass bowls. At about 2 inches (50.8mm) tall with a 14mm frosted joint, it slides into standard glass and locks in smoke with a tight seal. The reversal colorwork and spiral handle give it that heady look while keeping your fingers away from the heat.

Why You’ll Actually Use This Bowl Every Day

• Fast, clean snaps — Snapper-style bowl is sized for quick, full clears instead of half-charred leftovers.
• Less burnt fingers — The glass handle makes it easy to pull without grabbing hot glass right by the bowl.
• Solid seal on 14mm glass — Frosted joint bites into your downstem so you’re not losing smoke to sloppy airflow.
• Looks like real heady glass — Reversal pattern and spiral work add color and depth without needing a full custom slide.
• Easy to swap in and out — Standard 14mm male joint keeps it simple when rotating bowls between different pieces.

Best For

This bowl is made for flower smokers who like “one and done” snaps instead of huge party bowls. It’s a good match if you treat your bong like a daily driver and want a bowl that feels a little more special than the clear stock slide that came in the box. If you’re pairing it with a tough, travel-friendly setup, it also plays nicely with durable gear like our silicone bongs and rigs.

How to Use It

Drop the frosted 14mm joint into any 14mm female joint on your bong or water pipe and you’re ready to load. The snapper bowl is sized for quick, efficient packs, so you can run fresh bowls instead of roasting the same one over and over. The handle is there for a reason — use it to lift the bowl out when you’re clearing your hit so you’re not grabbing hot glass.

Between bowls, setting this piece on a dedicated dab mat or pad helps keep ash and resin off your table and saves you from surprise sticky rings on wood or glass surfaces.

When resin builds up, let the bowl cool, then tap out loose ash and wipe away surface residue. For a deeper reset, you can soak it in isopropyl alcohol, rinse thoroughly with water, and let it dry before the next sesh.

Specs

Fit & Compatibility

This bowl is built for any water pipe or bong with a 14mm female joint. If your piece uses an 18mm joint, you’ll need a reducer to step it down. It’s a flower-only design, so keep your concentrates in a dedicated setup and stash them properly in airtight concentrate jars instead of loading them into this bowl.

FAQ

• Will this fit my bong?

  As long as your bong has a 14mm female joint, this 14mm male bowl will fit right in. If your piece is 18mm, you’ll either need an adapter or a different-sized bowl. Unsure what you have? The 14mm joint is noticeably slimmer than the wider 18mm joint.

• How big is the bowl — is it for snaps or big party packs?

  It’s a snapper-style bowl, so think quick, personal to small shared hits instead of oversized party packs. If you like fresh greens each time and clearing the chamber in one go, this size hits the sweet spot.

• Is the handle strong enough to grab every time?

  Yes, the handle is solid glass and made to be used. Just avoid knocking it hard against other glass pieces. Treat it like any nice slide — firm but not reckless, especially when you’re a few bowls in.

• What exactly is a “reversal” design?

  Reversal refers to the layered, twisted color pattern you see in the bowl and handle. The glass colors are worked so the lines flip and spiral back on themselves, giving that trippy, heady look you usually see on more expensive slides and smoke shop glass.

• How do I clean it without ruining the color?

  The color is inside the glass, not painted on, so normal cleaning won’t hurt it. Let it cool, tap out the ash, then soak in isopropyl alcohol if it’s really gunked up, rinse well, and let it dry. Avoid scratching it with metal tools so you don’t leave marks.

• Can I use this bowl for concentrates too?

  This is designed for flower. Concentrates are better in proper rigs, bangers, or nectar collectors so you don’t deal with burnt residue baked into your flower bowl.

• Is this a good replacement for the stock bowl that came with my piece?

  Definitely. If your original bowl was basic, small, or easy to burn your fingers on, this gives you better grip, a solid seal, and way more personality. If you’re rebuilding your whole setup, you can round things out with extra pieces and tools from our accessories collection.