Box of Screens – Brass

Box of Screens - Brass - the cheapest fix for ash coming through the bowl

Two pulls into a fresh bowl and there is grit on your tongue. That is material getting through the hole in the bottom of the bowl, and a screen stops it. This is a box of brass screens, sold as a single box, and it is the least glamorous thing in the shop that improves a session the most.

Product at a glance

A box of brass smoking screens for flower bowls. A screen sits in the bottom of the bowl and holds ground material above the hole so ash and fragments do not pull straight through into the piece.

• Family: Screens
• Material: Brass
• Format: Sold as one box
• Use: Flower smoking
• Options: Single option, nothing to configure
• Availability: In stock, 10 on hand as listed
• What's Included: The box of screens only
• Fitment: Check the screen against your bowl opening before use

Screens are a consumable. They clog, they discolour, and after a while they stop pulling air the way they should. Buying a box rather than a couple at a time is the sensible move, because the moment you run out is always the moment you have already packed a bowl.

Brass is the traditional choice for screens. It is soft enough to dome with a fingertip into the shape of the bowl, and it holds that shape once it is seated. That workability is the whole point - a flat disc that will not conform to the bowl leaves gaps around the edge, and gaps are how material sneaks past.

We carry them because the alternative is worse. People without screens improvise, and improvised screens are usually something that should not be heated and inhaled through. A box of purpose-made ones costs almost nothing and removes the temptation entirely.

What a screen actually changes

Less pull-through. Ash and small fragments stay in the bowl instead of landing in your mouth or in the water.

An even burn. Material sits supported rather than collapsing into the hole, so the pack burns down more evenly.

Cleaner piece. What does not fall through does not need scrubbing out later.

Brass domes to fit. Press one into the bowl with a fingertip and it takes the shape of the bowl rather than sitting flat and loose.

A box lasts. These are meant to be swapped out regularly, and having a supply on hand is what makes that realistic.

Specifications

Spec	Detail
Product	Smoking screens
Material	Brass
Packaging	One box
Use case	Flower smoking
Variant options	One, no selection needed
Stock	10 on hand as listed
Included	Screens only
Reusable	Yes, until clogged or discoloured

Benefits

• Stops ash and fragments pulling through the bowl hole
• Keeps grit out of your mouth on the second and third pulls
• Supports the pack so it burns down evenly instead of collapsing
• Less debris in the piece means less scrubbing later
• Brass shapes to the bowl with light finger pressure
• Bought as a box, so you are not rationing the last one
• Removes any reason to improvise with something unsuitable
• Fits into a pouch or a tin without taking up space
• Swap-and-go: a clogged screen comes out and a fresh one drops in
• Works with hand pipes and bowls alike, with no fitting required

Using them properly

Take one screen, set it over the hole in the bowl, and press the centre down gently with a fingertip so it cups into the bowl. It should sit against the walls without a gap. Then pack on top of it as normal.

Replace it when the airflow drops off. A screen that has gone dark and stiff is restricting the pull, and pulling harder is not the fix.

Keep the box somewhere you will actually reach for it. A screen in a drawer across the room is a screen that does not get used.

Pro Tip: Dome the screen slightly upward into the bowl rather than leaving it flat. A flat screen sits on the bottom and lets material work around its edge, while a domed one presses into the walls of the bowl and seals the perimeter. It also lifts the pack a fraction, which helps it burn instead of smoulder.

Who this suits

Bowl smokers who hate grit. This is the whole solution, and it costs less than anything else on the shelf.

People who clean their piece often. Less debris getting through means longer between full cleans.

Anyone with a wide bowl hole. Some bowls are drilled generously and simply need a screen to be usable.

The improviser. If you have ever reached for something that was not made for this, keep a box on hand instead.

Frequently asked questions

What are these made from?

Brass, which is the material listed for this product. Brass is chosen for screens because it is soft enough to shape into the curve of a bowl under finger pressure while still holding that shape once it is seated. A screen that conforms to the bowl seals the edges far better than one that stays flat.

How many come in a box?

Our listing describes it as a box of screens and does not publish a unit count. We are not going to quote a number we cannot back up, so here is what we can confirm: it ships as one box, there is a single option to choose, and our stock figure currently shows 10 on hand.

Will they fit my bowl?

Check the screen against your bowl opening before you pack anything, since bowl openings vary from piece to piece. A screen should cover the hole and reach the walls once you dome it. Our listing does not publish a diameter, so the practical test is the one that counts here.

How often should I change one?

Swap it as soon as airflow drops off or the screen goes dark and stiff. There is no fixed schedule, because it depends entirely on how often you smoke and how finely you grind. Buying a box rather than singles is what makes replacing them on time a realistic habit instead of a chore.

Can I clean and reuse a screen?

Yes, a screen can be cleaned and put back for a while, and plenty of people do exactly that. Burning off residue or soaking it will buy you extra sessions. Eventually the mesh stays partly blocked no matter what you do, and at that point a fresh one from the box is the better answer.

Do I need one if my bowl has a small hole?

Not necessarily, since a narrow bowl hole already blocks most fragments on its own. Screens earn their place on bowls drilled with a generous opening, or when you grind fine enough that material falls straight through. If you are getting grit on the pull, a screen is the fix.

Is this in stock and does it need any assembly?

Our listing shows 10 boxes on hand and there is nothing to assemble. You take a screen out of the box, shape it into the bowl with a finger, and pack on top. No tools, no adhesive, and no fitting decisions beyond checking that the screen covers the hole in your bowl.

Care and handling

Screens can be knocked out and rinsed if you want more life from them. Let one cool fully first, tap the loose ash out, and rinse under warm water. Dry it before it goes back in the box so the rest of the box does not sit damp.

Keep the box closed. Loose screens in a bag get bent and creased, and a creased screen will not seat cleanly against the bowl walls.

Warning: A used screen is hot, and brass holds heat well after the bowl looks finished. Do not pick one out with bare fingers straight after a session, and never poke at a lit bowl to reseat a screen. Let it cool, then handle it.

Related collections

• Flower Bowls - the parts these sit inside
• Flower Accessories - the rest of the session kit
• Hand Pipes - pieces where a screen makes an immediate difference
• Cleaning Supplies - for when the piece needs a proper soak
• Accessories - everything else in the small parts aisle