2″ COLOR DOT IMPLOSION CARB CAP

The 2" Color Dot Implosion Carb Cap is a handcrafted glass cap for dabbers who want better vapor control and a bit of visual flair on their rig. The implosion dot design creates depth and color that catches light while you work, and the 2-inch diameter fits most standard flat-top bangers. Multiple color options let you match your setup or just grab whichever one speaks to you.

Why this cap works

• Actual airflow control — restricts the banger opening so you can milk your concentrates at lower temps instead of scorching them
• Implosion dot artistry — the color dot creates a three-dimensional effect in the glass, not just surface decoration
• Fits most flat-tops — 2-inch diameter works with standard quartz bangers without wobbling around
• Solid glass weight — heavy enough to stay put when you set it down, light enough to maneuver one-handed
• Easy to spot on a cluttered station — the color accent means you're not hunting for a clear cap among clear pieces

Best for

Low-temp dabbers who actually care about getting the most from their concentrates. If you're running a standard flat-top quartz banger and want something functional that also looks decent on your rig, this fits the bill. It's also a solid pickup if you're tired of losing clear caps in the shuffle—the color dot makes it easy to grab.

How to use it

Drop your concentrate into a heated banger, then place the carb cap over the opening. The cap restricts airflow, which lowers the air pressure inside the banger and allows your concentrates to vaporize at lower temperatures. This is where flavor lives. Spin or tilt the cap slightly while inhaling to direct airflow across the puddle and get even vaporization.

The implosion design isn't just decorative—the dot creates a slight focal point in the center of the cap. Some dabbers find this helps them position the cap consistently. Others just like watching the colors shift as vapor moves underneath.

Between dabs, set the cap on your dab mat rather than directly on a hard surface. Glass-on-glass contact is how chips happen. When the cap cools, wipe off any residue with a dry cloth. For deeper cleans, soak in isopropyl alcohol, rinse, and dry before reuse.

Specifications

Fit and compatibility

This cap works with most standard flat-top quartz bangers in the 25-30mm range. It won't seal properly on angled bangers, terp slurpers, or specialty nails with non-flat openings. If your banger has a beveled or rounded edge, the seal might not be as tight. For best results, pair it with a standard bucket-style banger.

The 2-inch diameter is intentionally oversized compared to the banger opening—this creates the overhang needed to trap vapor while still allowing you to manipulate airflow. Not designed for use with nectar collectors or other direct-contact methods.

Frequently asked questions

Will this fit my banger?

If you're using a standard flat-top quartz banger with an opening between 25-30mm, yes. The 2-inch cap provides enough coverage to seal and control airflow. Terp slurpers, angled bangers, and specialty nails may not seal properly.

Is the color just painted on?

No. Implosion dots are created by working colored glass rods into the clear glass during the blowing process, then pushing them inward to create depth. The color is embedded in the glass itself, not applied to the surface. It won't chip, peel, or wear off.

Can I use this with an insert or terp pearls?

You can use it with terp pearls—place the pearls in your banger before capping, and they'll spin as you inhale. For quartz inserts, make sure the insert sits low enough that the cap still seals on the banger rim. Some taller inserts may interfere with the seal.

How do I clean it?

Let it cool completely, then wipe off residue with a dry cloth or cotton swab. For stubborn buildup, soak in 91% or higher isopropyl alcohol for 10-15 minutes, then rinse with warm water and dry before your next session. Store with your other dab tools to keep everything in one place.

Does the color affect function?

Purely aesthetic. The implosion dot doesn't change airflow, weight distribution, or how the cap seals. It's there because handmade glass deserves a little personality.

What's the difference between this and a bubble cap?

Bubble caps have a rounded dome and directional airflow hole that lets you push vapor around the banger. This flat-style cap provides more even airflow restriction without the directional control. Both work—bubble caps offer more vapor manipulation, flat caps are simpler to use. Check our full carb cap selection if you want to compare styles.

Can I pick my color?

Multiple colors are available. If you have a specific preference, reach out and we'll let you know what's currently in stock. Colors vary by batch since each cap is handmade.