2″ 14MM DECAL WRAP FLOWER BOWL

The 2" 14MM Decal Wrap Flower Bowl is a glass replacement bowl for flower bongs and rigs, built for people who actually care what their setup looks like. It’s sized for standard 14mm female joints and stands about 2 inches (50.8mm) tall, so it feels substantial without being bulky. With a sandblasted joint for grip and a full decal wrap, this is the piece you grab when you want smoother pulls and a little more personality on the table.

Why You’ll Actually Use This Bowl

• Dial in your vibe — Full decal wrap lets you pick a look that matches your favorite piece instead of settling for plain clear glass.
• No wobbly connections — Sandblasted 14mm joint adds just enough texture so it seats snug and doesn’t spin around while you clear it.
• Plays nice with most glass — Standard 14mm male joint means it drops into the majority of modern bongs and rigs without needing adapters.
• Easier to handle when it’s hot — Clear glass marbles give you solid grip points so you can pull the bowl without pinching scorching glass.
• Simple swap, instant upgrade — At 2 inches (50.8mm) tall, it’s an easy drop-in upgrade that doesn’t throw off the balance of your daily driver.
• Built to stay in rotation — Borosilicate glass handles heat and quick temp changes better than cheap soft glass, so it can ride through heavy use.

Best For

This bowl is made for flower smokers who are tired of basic clear slides and want something with a little attitude that can still be a daily driver. If your old bowl is chipped, clogged, or just ugly, this is a clean swap that freshens up your favorite piece without changing how you sesh. It’s a nice match for anyone building a small lineup of go-to bowls to pair with different smoke shop products like ash catchers, downstems, or simple straight tubes.

How to Use It

Slide the 14mm sandblasted joint into any 14mm female joint on your bong or rig and make sure it’s fully seated so you’ve got a good seal. The sandblasting adds a bit of texture, so it grabs the glass instead of feeling slick and loose.

When you’re mid-sesh, use the clear marbles as grab points to lift the bowl out; they’re easier to hold and keep your fingers away from the hottest part of the glass. If you’re the type who likes to swap bowls between pieces on the fly, this one drops in just as easily to other rigs and even some hybrid silicone bongs & rigs with 14mm joints.

Cleaning is straightforward: let the bowl cool, tap out the ash, then soak or wipe with isopropyl alcohol, rinse with warm water, and dry before using again. A quick wipe on a nearby dab pad or mat helps keep any drips or loose ash from getting all over your table.

Specs

Fit & Compatibility

This bowl is designed for any water pipe or rig with a 14mm female joint. That’s the most common joint size on modern glass, so it should drop right into the majority of straight tubes, beakers, recyclers, and many compact rigs. If your current piece uses an 18mm joint, you’d need a reducer adapter to run this bowl.

Because it’s 2 inches (50.8mm) tall, it feels natural on everything from smaller daily drivers to taller tubes without sticking way up or sitting too low. It’s a solid option if you’re building out a small lineup of bowls to pair with different strains and keeping them organized alongside your storage & packaging setup.

FAQ

• Will this fit my bong or rig?

  If your piece has a 14mm female joint, yes, this bowl will fit. If you’re not sure, compare the joint to a known 14mm accessory or check what your current bowl says on the packaging.

• Is the sandblasted joint fragile?

  No — it’s still borosilicate glass, just etched for texture. Treat it like any other glass joint: avoid dropping, twisting too hard, or forcing it if pieces are stuck. A little warm water or alcohol on the joint can help if things get resin-locked.

• Do the decals fade or peel off?

  The decal wrap is made to stay put through normal use and cleaning. As long as you avoid scraping it with harsh tools and stick to alcohol soaks or gentle wiping, it should hold its color and detail. If you’re really particular about looks, storing your clean bowl in a drawer or with your other glass jars & packaging can help keep it from getting knocked around.

• Can I pick the exact decal design?

  Availability depends on current stock and options shown on the product page. If multiple designs are listed, you’ll be able to choose the one you want from the dropdown or selection area before checkout.

• How should I clean this bowl without ruining the decal?

  Let it cool completely, tap out any ash, then soak or wipe with isopropyl alcohol. Avoid metal tools on the outside surface; use something soft if you need to scrub. Rinse with warm water and let it dry before your next pack. Keeping a simple routine like this helps your bowl and even your dab tools look fresh.

• Is this a good option as my only bowl, or more of a backup?

  It’s built tough enough to be your daily driver bowl. The borosilicate body and sandblasted joint are meant for regular use, and the marbles make it easier to handle every day. Some people grab a couple different designs so they can rotate bowls between pieces or keep a “cleaner” one ready next to their parchment papers and rolling setup.

• Will the marbles get in the way when I’m clearing the piece?

  No — the marbles sit on the outside as grip points and don’t affect the airflow path. You’ll just notice it’s easier to pull the bowl cleanly, especially when you’re a few bowls in and not trying to grab hot, slick glass with your fingertips.