1.5″ FULL COLOR DOUBLE SIDED CARB CAP

The 1.5" Full Color Double Sided Carb Cap is a compact glass carb cap built for dabbers who care about flavor and control. It’s ideal if you’re running a standard flat-top banger and want better vapor production without going to some bulky, awkward cap. At 1.5 inches (38mm) across, it’s small, nimble, and colorful enough to stand out on the table while still actually doing its job.

One side gives you a more open, free-breathing pull, while the other lets you throttle the airflow for thicker, denser vapor. Flip it, tilt it, or spin it—this cap is all about dialing in the way your rig hits, not just looking pretty.

What You Get Out of It

• Better flavor from the same amount of concentrate — Dual-sided design lets you fine-tune airflow so more of your dab gets vaporized instead of pooling and wasting.
• Two airflow moods in one cap — One side more open, one more restrictive, so you can switch it up depending on the dab, the temp, or just your mood.
• Easy to handle, even when you’re cooked — The 1.5 inch (38mm) footprint gives you enough glass to grip without feeling clumsy over the banger.
• Cleans up quick — Smooth glass surface wipes down easily so you’re not staring at baked-on reclaim every time you sesh.
• Adds color to your setup — Full-color glass looks good on the rig and makes it easy to spot on a crowded coffee table.

Best For

This cap is made for dabbers who already have a favorite rig and just want tighter control over airflow without investing in a whole new piece. If your setup lives on a dedicated dab mat and you’re picky about getting full flavor from small-to-medium dabs, this is right in your lane.

It’s also a solid pick if you like to keep your gear simple: no spinning marbles or moving parts, just a reliable, dual-sided glass carb cap that does what it’s supposed to every time.

How to Use It

Once your banger is ready and you’ve dropped in your dab, set one side of the carb cap over the top of the nail to cover it fully. Tilt and rotate the cap as you pull — that directional movement helps push vapor around and keeps your concentrates from pooling in one cold corner of the bucket.

When you want a different feel, just flip the carb cap to the other side and cap the banger again. You’ll notice a change in resistance and vapor density, so you can choose which side works best for that particular dab. Pair it with one of our metal or glass dab tools so you’re not trying to juggle sticky concentrates with improvised tools.

After you’re done, let the carb cap cool on your rig tray or accessory station, then wipe off any fresh residue before it hardens. A quick habit like that keeps your cap looking new and hitting clean.

Specifications

Fit & Compatibility

This 1.5" Full Color Double Sided Carb Cap is sized to play nice with most standard flat-top quartz bangers and small-to-medium buckets. As long as your banger opening is around 1.5 inches (38mm) or smaller, you’ll be able to get a solid seal by centering the cap and tilting slightly as you pull.

Because it’s glass and relatively compact, it pairs especially well with smaller dab rigs and compact setups, including many silicone bongs and rigs that use quartz inserts or bangers. Just check your banger diameter if you’re running anything oversized or specialty.

Care & Cleaning

Let the carb cap cool down before you clean it — hot glass and liquids don’t mix well. Once it’s at room temp, wipe off any fresh residue with a dry or slightly damp cloth. For deeper cleaning, soak the cap in isopropyl alcohol, rinse it with warm water, and dry fully before your next sesh.

If you like to keep everything spotless, store your clean cap next to your concentrate jars so it’s always ready to go when you bust out your favorite extracts.

FAQ

• Will this carb cap fit my banger?
  If your banger opening is around 1.5 inches (38mm) across or smaller, you’re good. Just set the cap over the top and tilt slightly to get a seal. Oversized or specialty buckets may need a larger cap, but this covers most standard flat-top styles people use as daily drivers.
• What’s the point of it being double sided?
  Each side gives you a different airflow feel. One side is more open for easier pulls, the other is a bit more restrictive for denser vapor. You can flip between them depending on how thick you want your clouds or how you like your rig to function.
• Is it okay to use this with an e-banger or electronic setup?
  Yes, as long as the opening size matches and your coil or heater doesn’t interfere with the cap sitting on top. Just treat it like any other glass carb cap and be sure it doesn’t touch any exposed heating elements, especially on more complex smoke shop products or custom builds.
• How do I keep it from getting covered in reclaim?
  Let the cap cool slightly after each dab, then wipe the edges and underside with a cloth or cotton swab to catch the fresh residue. For buildup that’s already hardened, a quick iso soak works great — just rinse and dry before you put it back in rotation.
• Is the color on the glass going to fade or burn?
  The color is in the glass itself, not a painted-on layer, so under normal dab temps it shouldn’t fade or peel. Just avoid dropping it, slamming it on hard surfaces, or shocking it with sudden temperature changes.
• Can I use this with a nectar collector or dab straw?
  No, this style of carb cap is meant for bucket-style bangers on rigs, not for nectar collectors and dab straws. For those, you just need a good tip and a safe dish or surface for your concentrates.
• Is this a good option for a first carb cap?
  Absolutely. It’s simple, affordable, and gives you two airflow options in one piece of glass. If you’re just getting into dabs and want something that will work with most standard bangers while you dial in your setup, this is a strong starter that will still hold up once you upgrade the rest of your gear.