The 6.5" Fillacello Decal Rig is a compact glass dab rig built for dabbers who want smooth function and eye-catching style without taking up half the coffee table. Standing just 6.5 inches tall with a footed can-style base, this rig delivers stable, tip-resistant performance with a showerhead perc that diffuses your vapor for cooler, cleaner hits. Comes ready to use with a 14mm 90-degree quartz banger included.
Why this rig works
- Smooth, filtered hits every time — the showerhead perc breaks up vapor through multiple slits for proper diffusion without drag
- Won't tip over on you — the footed can-style base keeps it planted during sessions
- Ready to dab out of the box — 14mm 90-degree banger included, no extra purchases needed
- Built to last longer — bridged joint reinforces the weak point where most rigs eventually crack
- Artwork that covers the whole piece — Fillacello decal wraps the neck, body, foot, and joint for full visual impact
- Compact enough for daily use — 6.5 inches (165mm) means it fits in tight spaces and travels easier than larger rigs
Best for
This rig hits the sweet spot for dabbers who want something better than a basic starter piece but aren't ready to drop serious money on heady glass. It's sized right for apartment setups, dorm rooms, or anyone who doesn't want their rig to dominate the space. The showerhead perc makes it forgiving for newer dabbers still dialing in their technique, while experienced users will appreciate the smooth function and included banger. Available in two color styles, so you can pick the one that fits your vibe.
How it works
The showerhead perc sits at the base of the rig's main chamber. When you draw through the mouthpiece, vapor from your quartz banger gets pulled down through the downstem and forced through multiple slits in the showerhead. This breaks the vapor into smaller bubbles, increasing surface area contact with the water. More contact means more cooling and filtering before the vapor reaches your lungs.
The 90-degree joint angle positions the banger horizontally, which many dabbers prefer because it keeps the banger away from the body of the rig and makes heating easier. The bridged joint design adds a small glass support between the joint and the rig body—this reinforces what's normally the most fragile connection point on any water pipe.
The footed can-style base isn't just for looks. That wider, heavier bottom keeps the center of gravity low, so the rig stays upright even when you're reaching across the table or bumping the surface. Pair it with a silicone dab mat underneath for extra stability and to protect your surfaces from heat and reclaim.
The Fillacello decal design
Unlike rigs with a single logo or small accent, the Fillacello decal treatment wraps around the entire piece—neck, body, foot, and even the joint. The design references the colorful, intricate aesthetic of traditional folk art pottery, giving the rig a distinctive look that stands out from plain clear glass or generic color accents. Two color style options let you match your setup or just pick whichever one you like better.
Specifications
| Feature | Specification |
|---|---|
| Height | 6.5 inches (165mm) |
| Joint Size | 14mm female |
| Joint Angle | 90 degrees |
| Percolator | Showerhead |
| Base Style | Footed can |
| Joint Reinforcement | Bridged |
| Included | 14mm 90-degree quartz banger |
| Color Options | Two styles available |
What's included
- 6.5" Fillacello Decal Glass Rig
- 14mm 90-degree quartz banger
Compatibility notes
The 14mm female joint works with any 14mm male accessories. The included banger gets you started, but you can swap in different nail styles as your preferences develop. Works with standard carb caps—bubble caps, directional caps, and spinner caps all fit depending on your banger style. If you're using a terp pearl setup, make sure your cap creates enough airflow to spin the pearls.
The 90-degree joint angle means you'll want a torch that can heat from below or at an angle. Most standard butane torches work fine. The rig's compact size means you don't need a ton of water—fill just enough to cover the showerhead slits, usually about an inch above the perc.
Care and cleaning
Let the rig cool completely after sessions. For regular maintenance, change the water daily and give the chamber a rinse. For deeper cleans, soak in isopropyl alcohol (90% or higher works best), rinse thoroughly with warm water, and let it dry completely before your next session. The decal is fired onto the glass, so it holds up to normal cleaning—just avoid abrasive scrubbing directly on the artwork.
Frequently asked questions
Does this come with a banger or do I need to buy one separately?
It comes with a 14mm 90-degree quartz banger included. You're ready to dab right out of the box—just add concentrates and a torch.
What's a bridged joint and why does it matter?
A bridged joint has a small glass support connecting the joint to the rig body. This reinforces what's typically the weakest point on any water pipe. It helps prevent the joint from snapping off if you accidentally knock the banger or apply sideways pressure.
How much water should I put in this rig?
Fill until the water level sits about an inch above the showerhead perc slits. You want enough water for the perc to function and create bubbles, but not so much that water splashes up into the neck when you draw. Start with less and add more until you find the sweet spot.
Can I use this for flower or is it only for concentrates?
Technically you could add a 14mm bowl and use it for flower, but it's designed as a dab rig. The chamber size and perc style are optimized for concentrate vapor, which needs less filtration than smoke. For flower, you'd probably want something with more volume and different percolation.
Will the decal come off if I clean it with alcohol?
The Fillacello decal is fired onto the glass, not a sticker or surface coating. Normal isopropyl alcohol cleaning won't damage it. Just avoid scrubbing the decal areas with abrasive brushes or pads.
What's the difference between the two color styles?
Two distinct color variations are available. The Fillacello design stays consistent, but the color palette differs between options. Check current availability for specific color details.
Is 6.5 inches too small for a dab rig?
For concentrates, smaller is often better. Less air volume means vapor reaches you faster with more flavor intact. Larger rigs can diffuse and cool the vapor too much, muting terpene profiles. This size is considered ideal for flavor-focused dabbing while still providing enough percolation for smooth hits. If you're coming from bigger bongs, the smaller size might feel different at first, but most concentrate enthusiasts prefer compact rigs for a reason.